Used machine tools in Canada

Oster 716 Pipe and Bolt Threader 6″ model LE31

"Normal wear from use." Oster 716 LE31 Pipe and Bolt Threader 6″ capacity. Only $6,899.00 USD! Excluding shipping. Sold as is, but warranted in good condition. We're quite friendly and It's much faster than back ...

3/4″ National 4DIE BOLTMAKER

• Manufacturer: National
• Model: 3-4

Equipped With Max cutoff diameter: 22 mm (.866") | Min/max kickout: 30 - 160 mm (1.181" - 6" | Min/max cutoff length: 38 - 200 mm (1.496" - 7.874") | Max thread length: 78 mm (3") | Max output: 90 PPM | Heading l...

1975 National 6L4

• Manufacturer: National
• Model: 6L4

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

REED B105

• Manufacturer: Reed

Equipped With *In Feed and Thru Feed Capability *Quick setup features *Work support tooling on a fixed centerline *Hydraulically actuated *Direct drive motor/gearbox ass'y *AC inverter variable speed control *Equ...

HARTFORD 40-140

• Manufacturer: Hartford
• Model: 40-140

Equipped With Low Hours, 1380 * AIM P270 power dereeler * Feed rolls/tooling for .108 .125 .157 .188 .250 .313 * Ring tools for .250 and .313 * Stand alone ring butt welder Max Wire Tensile at Max Wire Dia: 550N/...

2013 GOVAMA 3R-9

• Manufacturer: GOVAMA

Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...

2007 VIDEX VAS-20BRH

• Manufacturer: Videx

Equipped With Machine setup for Radiator Hooks with a press in the center ** For production of bent bolts with threads on one end, such as eye bolts & anchor bolts >>Fully Automatic production from Wire Coil, Str...

VIDEX

• Manufacturer: Videx

Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...

2021 GOVAMA HK25

• Manufacturer: GOVAMA

Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

PRUTTON 150 AH

• Manufacturer: Prutton

Equipped With Wire diameter range: 3/16" - 3/8" | Max. thread length: 3" | Magazine feed: 30" | Max production rate: 350 ppm | Machine weight: 3,500 lbs.

2002 KINEFAC MC-4

• Manufacturer: KINEFAC

Equipped With Max. Threading Diameter (In-feed): 1-1/2" Max. Thread Diameter (Thru-feed): 3/4" Min. Diameter Infeed or Thrufeed: 1/32"

MAX-TEK 2

• Manufacturer: MAX-TEK

Equipped With * Vibratory Bowl Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Speed: 1500 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl | Dimensions: 4'W x 5.5' L approx. | Weight: 300...

PRUTTON 75 CNVB

• Manufacturer: Prutton
• Model: 75CNVB

Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .250" | Max. thread length: 2-7/8" | Shank length: 4" | Dies: 90deg seg | Speed: 1500 ppm | Electrics: 480volts/3ph/60cyl | Weight: 3000 L...

1997 VIDEX VA-10

• Manufacturer: Videx

Equipped With Max. thread diameter: 3/8" (M10) | Min. thread diameter: 1/8" (M2.5) | Max thread length: 2-3/8" (60mm) | Maximum blank length: 4" (100mm) | Maximum production: up to 800 PPM | Thread rolling die si...

REED A22

• Manufacturer: Reed
• Model: A22

Equipped With Specifications for Diameter & Thread lengths are Infeed only