- Trusted Seller
LTF TB16
used
- Manufacturer: LTF
DATI TECNI: Drilling diameter: 16 mm | Voltage: 220 Volt | Installed power: 0.6 Hp | Bildrechte: Woodmercator |
Cormons, Italy - Trusted Seller
Polishing/straightening unit RIPO SCHUMAG 0B
used
- Manufacturer: Schumag
Feeding pinch-roll Polishing/straightening unit RIPO Exit pinch-roll Main motor Local push-buttons panel New tooling Supports for tubes guide Straightening unit with n°5 and n°7 bushings
Udine, Italy 
Vita Horizontal and vertical drilling machine for carpenter, pitch 32mm
used
- Manufacturer: Vitap
Vita Horizontal and vertical drilling machine for carpenter, pitch 32mm
$469 USDSan Giovanni Al Natisone, Italy
SCM Drilling machine for carpenters, horizontal and vertical, with 39 spindles
used
- Manufacturer: SCM / SCMI
SCM Drilling machine for carpenters, horizontal and vertical, with 39 spindles
San Giovanni Al Natisone, Italy- Trusted Seller
POLISHING/STRAIGHTENING UNIT SCHUMAG RIPO 3B
used
- Manufacturer: Schumag
Working range: Ø19-45 mm. | Motor power: 2 X 75 kW a.c. | Tension: 400 V. - 50 Hz.
Udine, Italy - Trusted Seller
Cormons, Italy - Trusted Seller
HYDRAULIC ROTARY CLAMP TAYLOR
used
- Manufacturer: Taylor
TAYLOR HYDRAULIC ROTARY STRETCHER - USED working length mm. 2400 working width mm. 800 20 sections 3 pressors for each section
San Giovanni al Natisone, Italy 
San Giovanni Al Natisone, Italy
San Giovanni Al Natisone, Italy- Trusted Seller
PRIMULTINI- USED BLADE SHARPENING MACHINE
used
- Manufacturer: Primultini
PRIMULTINI- USED BLADE SHARPENING MACHINE
San Giovanni al Natisone, Italy 
$469 USDSan Giovanni Al Natisone, Italy
Balestrini Head drilling cutter model 1.2.F.
used
- Manufacturer: Balestrini
Balestrini brand drilling cutter head model 1.2.F. serial number 1120, used.
San Giovanni Al Natisone, Italy
$1,172 USDSan Giovanni Al Natisone, Italy- Trusted Seller
Pointing machine MILL SP 120/2
used
- Manufacturer: MILL
Working range: Ø 5 – 15 mm. | Motor power: 4 kW | Pointing axle: Horizontal and vertical + shear | Tension: 380 V. - 50 Hz.
Udine, Italy - Trusted Seller
End milling machine-boring machine-moulder
used
- Manufacturer: Fiorenza
TECHNICAL DATA Left - right tilting saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and jambs. ...
Cormons, Italy
Tip: Enter manufacturer, model or keyword
