Used Claas Combines in Germany

Claas combine #M0283
- Manufacturer: Claas
- Hours: 2,050 h
- Cutting width: 3.9 m
mech. drive, 5x shaker Operating hours: 2050 | Engine performance: 88 kW | Cutting tool width: 3,90 m | Set of tyres - back: 12.5 R 18 - 70 % | Set of tyres - front: 23.1 R 26 - 70 % | Shaker count: 5 | Comments:...
Bremen, Germany
2006 Claas combine #M0751
- Manufacturer: Claas
- Cutting width: 7.5 m
All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer
Bremen, Germany
1996 Claas combine #M0775
- Manufacturer: Claas
- Hours: 3,512 h
- Cutting width: 5.1 m
Operating hours: 3512 | Engine performance: 125 kW | Cutting tool width: 5,10 m | Set of tyres - back: 650/75R34 | Set of tyres - front: 500/60-22.5 | Shaker count: 5 | Comments: Häcksler, 3-D, Reversiereinricht...
Bremen, Germany
2003 Claas combine #M0663
- Manufacturer: Claas
- Cutting width: 6 m
Auto Contour, on-board computer, throughput control, yield measurement, pendulum compensation, reversing device, automatic cutterbar guidance, loss measurement, chaff spreader, chopper, air conditioning, cutterba...
Bremen, Germany
Trusted Seller
2008 CLAAS Lexion 580 Terra Trac
- Manufacturer: Claas
- Model: LEXION 580
- Horsepower: 424 hp
- Hours: 3,480 h
Lexion 580 Terra Trac - 2 rotors - Yield mapping - Moisture meter - Automatic hitch - Autocontour Header: Claas V900 | S/N: Z1608194 Header trailer: Claas Transport trailer | S/N: 71926663
$133,798 USD
Get financing
Est. $2,518/mo
Husum, Germany
Air conditioning compressor for Claas combine harvesters
- Manufacturer: Claas
Bremen, Germany
Trusted Seller
1984 CLAAS Dominator 76
- Manufacturer: Claas
- Model: DOMINATOR 76
- Horsepower: 120 hp
- Hours: 3,516 h
Dominator 76 . . Power: 128 HP (94 KW) | Operating hours: 3516 hours | Category: Combine harvester
$17,452 USD
Get financing
Est. $343/mo
Wittingen, Germany
Trusted Seller
2011 CLAAS Tucano 320
- Manufacturer: Claas
- Model: TUCANO 320
- Horsepower: 241 hp
- Grain tank size: 6,500 L
Category: Combine harvester | Drumming lessons: 1039 std
$138,452 USD
Get financing
Est. $2,606/mo
Gudensberg, Germany
Trusted Seller
2022 CLAAS Lexion 7700 TT
- Manufacturer: Claas
- Model: LEXION
- Horsepower: 790 hp
- Hours: 880 h
Lexion 7700 TT Claas Vario 1080 cutting system, Cruise Pilot, Jet Stream cleaning system + 3D grain tank discharge pipe XXL, 420 mm radial distributor, Special Cut, MAN D2676 engine - 404 kW/549 hp, 1,150 liter f...
$389,760 USD
Get financing
Est. $7,335/mo
Holle, Germany
Trusted Seller
1999 CLAAS Lexion 480 Terra Trac
- Manufacturer: Claas
- Model: LEXION 480
- Threshing system type: Hybrid
Lexion 480 Terra Trac Claas Lexion 480 Terra Trac in good condition Contact Christian ErdmannClaas Lexion 480 Terra Trac
$83,769 USD
Get financing
Est. $1,577/mo
Wehretal, Germany
Trusted Seller
2020 CLAAS Convio 13.80 m
- Manufacturer: Claas
Category: Combine harvester
$63,989 USD
Get financing
Est. $1,204/mo
Wendorf, Germany
2008 CLAAS Lexion 570
- Manufacturer: Claas
- Model: LEXION 570
- Horsepower: 23 hp
- Hours: 4,105 h
Hp (kw): 431 HP (317 kW) | Operating hours: 4105 Hours | On-board computer: Yes | Tyre equipment rear: 500/85R24 | Tyre equipment rear %: 50 % | Tyre equipment front: 680/85R32 | Tyre equipment front %: 60 % | D...
$94,240 USD
Get financing
Est. $1,774/mo
Schöntal, Germany
2004 Claas Lexion 560 20843-448897310249
- Manufacturer: Claas
- Model: LEXION 560
- Horsepower: 290 hp
- Grain tank size: 9,866.94 L
Description Working width:: 7.5 m Rotor running hours:: 2,588 m/h Axles Second axle:: 900/60 R32 Rear axle:: 600/55 R26,5 Condition Condition:: used
$137,760 USD
Get financing
Est. $2,593/mo
Germany
2013 Claas Lexion 650 20843-452951710251
- Manufacturer: Claas
- Model: LEXION 650
- Horsepower: 349 hp
- Axle configuration: 4x2
Description Working width:: 7.5 m Rotor running hours:: 1,407 m/h Speed:: 25 km/h Axles Axle configuration:: 4x2 Second axle:: 900/60 R32 Rear axle:: 600/65 R28 Condition Condition:: used
$233,984 USD
Get financing
Est. $4,404/mo
Germany
2022 Claas 7700 TT 20843-420205310364
- Manufacturer: Claas
- Axle configuration: 4x2
Description Working width:: 10.8 m Rotor running hours:: 530 m/h Axles Axle configuration:: 4x2 Second axle:: K Rear axle:: 620/70 R30 Condition Condition:: used
$462,291 USD
Get financing
Est. $8,700/mo
Germany
Claas LEXION Combine
- Manufacturer: Claas
- Model: LEXION
Good condition Claas LEXION Combines available between 1997 and 2018 years. Located in USA and other countries. Click request price for more information.
USA