Used Tanks & Kettles in Germany

46500 liter isolated storage tank, Aisi 316

• Manufacturer: ALBI Alois Binderberger

max. allowable working temperature: 25 °C remarks: Cylinder manhole diameter: 600 mm; total height as per drawing without feet

204 liter pressure tank MF200, Aisi 316

• Manufacturer: Wilhelm Schmidt

max. allowable working temperature: 50 °C remarks: Manufacturer's description available; No bottom outlet

63 liter insulated pressure tank, Aisi 304

max. allowable working temperature: 135 °C remarks: 2 support brackets, stainless steel; smaller dents and smaller sheet metal cuts in the insulation jacket

4000 liter insulated pressure tank, Aisi 304

remarks: Manhole approx. 335 x 445 mm; Tank with dents inside and outside (see photos); former heating jacket no longer functional; Inner tank was successfully tested for leaks at 3 bar

100000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Apparatebau Nordhausen

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): half-coil remarks: The double jacket (615 liter) is divided into a total of 4 chambers

800 Liter storage tank with sight glass, Aisi 304

remarks: Diameter of hand hole approx. 350 mm; slight signs of corrosion inside

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

15000 Liter insulated pressure tank, Aisi 304

remarks: Steel heating pipes 2" in the skirt below the bottom of the tank

710 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

1100 liter insulated pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C remarks: Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos)

63 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 200 °C remarks: Tank was screwed to a suspension in a plant; brownish adhesions inside (probably lime)

600 liter pressure tank (separator), Aisi 316

max. allowable working temperature: 95 °C remarks: 2 support brackets, stainless steel; 1 piping inside the tank; small dents in the insulating jacket

Stainless steel tank 750l with pump control condensate vessel VA

• Manufacturer: Musterfirma

Condensate tank, food tank With pump, partial control 295 kg 1.0 x 1.0 x 0.75 m Various small differences in detail Please note that the colors on your screen may differ slightly from the original colors.

310 liter insulated pressure tank, Aisi 316

remarks: Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket