Used Tanks & Kettles in Germany

30000 liter horizontal storage tank on 2 saddles

remarks: 2 loose bearing shells, Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front bottom; each stronger dents in the cylinder

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

41000 liter heat-/coolable horizontal tank, Aisi 304

Temperature control cylinder (dj): squared half-coil remarks: 1 manhole approx. 300 x 385 mm in the front bottom, 4 loose bearing shells, Fe with 2 height-adjustable feet each, Fe (height-adjustable screws partly...

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

Stainless steel tank from OKKN - 1300 liters 17227

• Manufacturer: OKKN

Stainless steel tank, stainless steel tank, silo plant, tank, fertilizer storage silo -filling and draining fitting

10800 liter pressure tank, Aisi 316

• Manufacturer: Pass + Co

max. allowable working temperature: 100 °C latest application: Brine tank (water / salt solution) in a chemical plant

325 liter pressure tank, Aisi 304

max. allowable working temperature: 50 °C Volume: 325 liter | Max. excess pressure: 1.5 bar | Lower bottom: cone shaped bottom | Upper bottom: torispherical bottom | Stand type: legs | Quantity legs: 3 Piece | Gr...

2750 liter pressure tank, Aisi 316

• Manufacturer: BERTSCH

max. allowable working temperature: 100 °C Volume: 2.750 liter | Vacuum: 0,25 bar | Max. excess pressure: 1,0 bar | Lower bottom: torispherical bottom | Upper bottom: torispherical bottom | Stand type: legs | Qua...

48100 liter storage tank, Aisi 316

• Manufacturer: Hinke

max. allowable working temperature: 100 °C Volume: 48.100 liter | Vacuum: 0,25 bar | Max. excess pressure: 1,0 bar | Bottom: torispherical bottom | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 2.9...

12440 liter pressure tank, Aisi 304

• Manufacturer: Ziemann Holvrieka

Volume: 12.440 liter | Max. excess pressure: 2.6 bar | Stand type: legs height adjustable | Quantity legs: 4 Piece | Diameter inside: 2.290 mm | Cylindrical height: 2.190 mm | Total height: 4.550 mm | Wall thick...

8380 liter pressure tank, Aisi 316

• Manufacturer: Metkon AG

max. allowable working temperature: 200 °C remarks: 3 support brackets, Aisi 304 (1 support bracket was cut off during disassembly and is enclosed loose); more technical documents available