Used performance testing in Dublin, Ireland

Rohde & Schwarz ESIB26

• Manufacturer: Rohde & Schwarz
• Model: ESIB26

Details The Rohde & Schwarz ESIB26 offers high sensitivity and low inherent noise, enabling precise signal detection across a wide dynamic range. Featuring fast measurement speeds, integrated preselection and pre...

Keysight (Agilent) N9038B

• Manufacturer: Agilent - Keysight

Details Keysight (Agilent) N9038B 3Hz To 44GHz Mxe EMI Test Receiver Description: Frequency Range: 3 Hz to 44 GHz Maximum Analysis Bandwidth: 160 MHz Maximum Real-Time BW: 160 MHz DANL @1 GHz: -174 dBm Perform EM...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

Haefely ECOUPLER 4

• Manufacturer: Haefely

Details The Haefely Ecoupler-4 is a coupling/decoupling network engineered for surge and EFT/Burst testing. It ensures precise disturbance injection into equipment under test while safeguarding auxiliary devices....

Haefely ECOMPACT 4

• Manufacturer: Haefely

Details The Haefely Ecompact-4 is a compact EMC immunity test generator optimized for surge and EFT/Burst testing. It complies with IEC/EN 61000-4-4 and 61000-4-5 standards, ensuring accurate pre-compliance and c...

Haefely PIM150

• Manufacturer: Haefely

Details The Haefely PIM150 is a high-voltage impulse generator engineered for precise insulation and dielectric testing. It delivers controlled discharges to assess dielectric strength and insulation performance ...

Marconi IFR Aeroflex 500A

• Manufacturer: Aeroflex

Details The Marconi IFR Aeroflex 500A Communications Service Monitor integrates FM and AM signal generators with a sensitive 2 mV receiver, enabling AM, FM, and SSB testing. It includes a 0.2 ppm TCXO for precisi...

Anritsu MA2473A

• Manufacturer: Anritsu

Details The Anritsu MA2473A is designed for high-frequency RF diagnostics, covering 10 MHz to 32 GHz with an exceptional dynamic range of –70 dBm to +20 dBm (~90 dB). It features wideband performance, rapid diode...

Haefely PCD130

• Manufacturer: Haefely

Details The Haefely PCD130 is designed for surge and EFT/Burst coupling/decoupling in power line testing. It allows precise disturbance injection while isolating connected devices to ensure reliable measurement i...

JDSU OLP-82P

• Manufacturer: JDSU - Viavi - Acterna

Details The Viavi OLP-82P 780 To 1650nm Handheld Optical Power Meter offers precise wavelength coverage from 780 to 1650 nm, making it ideal for a variety of optical network testing applications. It features a hi...

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

EMCO 3110B

• Manufacturer: Emco

Details The Emco 3110B Biconical Antenna operates in the 30 MHz to 300 MHz frequency range, making it ideal for radiated emissions testing. It is designed with lightweight aluminum rod elements welded into a fixe...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...