Used performance testing in Dublin, Ireland

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...

Schaffner NSG 224A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-224A is a modular disturbance simulator mainframe engineered for the NSG-200 series, delivering core functionality such as power handling, line filtering, overload protection, and phase ...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

Keysight (Agilent) N9038B

• Manufacturer: Agilent - Keysight

Details Keysight (Agilent) N9038B 3Hz To 44GHz Mxe EMI Test Receiver Description: Frequency Range: 3 Hz to 44 GHz Maximum Analysis Bandwidth: 160 MHz Maximum Real-Time BW: 160 MHz DANL @1 GHz: -174 dBm Perform EM...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

Haefely ECOUPLER 4

• Manufacturer: Haefely

Details The Haefely Ecoupler-4 is a coupling/decoupling network engineered for surge and EFT/Burst testing. It ensures precise disturbance injection into equipment under test while safeguarding auxiliary devices....

Haefely ECOMPACT 4

• Manufacturer: Haefely

Details The Haefely Ecompact-4 is a compact EMC immunity test generator optimized for surge and EFT/Burst testing. It complies with IEC/EN 61000-4-4 and 61000-4-5 standards, ensuring accurate pre-compliance and c...

Marconi IFR Aeroflex 500A

• Manufacturer: Aeroflex

Details The Marconi IFR Aeroflex 500A Communications Service Monitor integrates FM and AM signal generators with a sensitive 2 mV receiver, enabling AM, FM, and SSB testing. It includes a 0.2 ppm TCXO for precisi...

Schaffner NSG 223

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG223 Interference Generator Plug‑In delivers high‑energy pulses to simulate destructive transients such as switching inductive loads or lightning surges. It can superpose symmetrical...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...