Used Machine Tools in Greater Poland, Poland

Zangheri multi-spindle drilling machine 2 heads

Zangheri MULTI-SPINDLE DRILLING MACHINE, 2 x bottom drilling heads with 21 spindles each, maximum vertical head spacing 800mm, drills mounted with quick-release couplings, left/right spindles, spindle spacing 32m...

Maggi 21 multi-spindle drill (like new)

• Manufacturer: Maggi

Maggi multispindle drilling machine 21 spindles left/right spindles spindle distance 32mm drilling vertically, horizontally or at an angle 3 pneumatic clamps 380V power supply, 1.5KW motor machine in like-new con...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

Holztech s320 sliding table saw

Holztech S320 Sliding Table Saw 5.5kW main motor, 3 speeds, 350mm maximum blade, 0.75kW scoring unit, 120mm, 320cm carriage, right-hand culage, manually adjustable up to 1230mm, 0-45° tilt, manually adjustable, u...

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

EMCO EBS 400 band saw

• Manufacturer: Emco

Engine: 1,1KW | Upper wheel: 40cm | Lower wheel: 40cm | Tape: 320cm

Dewalt DW729 Crosscut Saw

• Manufacturer: DeWalt

Engine: 4KW | Maximum shield size: 350mm | Cutting range: 800mm

Rema 150cm sliding table saw

• Manufacturer: Rema

Rema sliding table saw, 150cm carriage, manually adjustable saw blade up and down, 6kW main motor, can be tested before purchase.

Kamro 260cm inclined format saw

Technical data; Does it have a cutter: Yes | The length of the trolley: 260 cm | Up-down adjustment: Yes, manually | Tilt adjustment: Yes, manually | Engine size: 5,5 KW | Power: 380 V

Altendorf 140cm tkr 45 sliding table saw

• Manufacturer: Altendorf

Cart: 140cm | Undercutter: 0.75KW | Main engine: 4KW | Maximum shield size: 350 | Slope: manually adjustable | Height: manually adjustable | Cutting width on the right: 125cm

Felder K500S panel saw

• Manufacturer: Felder

Felder K500s sliding table saw with carriage The length of the trolley: 250 cm | Has an undercutter: Yes | Engine size: 4 KW | Engine size undercutter: 0,75 KW | Up-down adjustment: Yes, manual | 0-45° adjustment...