Used Processing in Canada

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

• Manufacturer: Read

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

Signode Power Strapping Machines

• Manufacturer: Signode

-Maximum cycle speeds vary from 575 to 1500 straps per hour -Strap feed and take -Up speed is 5.3 feet per second -230/460 V -Model number: MCD 700

168 Litres tank with mixer on the bottom

-Tank dimensions:23" heigh x 24" wide. -Over all height 44" -4 legs are 22" tall -Off spout side of bottom is 2.5" diameter -Open top with lid -Cone bottom -37 IMP gall

2 Stage high vac Airtech system

• Manufacturer: Airtech

-Rotary vane vacuum pump with booster -AC500 Booster: Weg motor has 2.2 (3.0) HP, 50HZ, 220/380 Volts, 7,81AMPS, model: 00236ET3WAL90LFF-W22 –L63 Vacuum pump motor: 3HP, 1760RPM, 230/460 Volts –Shipping dimension...

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Ouellet explosion proof heater

• Manufacturer: Ouellet

-600 volts , 3 phase , has thermostat on the side. -Motor is: 575 volts, 1/2 hp, 1725 rpms -The fan is 21” -Housing is 2’ wide x 2’3” height x 1’ depth -Shipping dimensions: Height: 3 ‘ x Width: 3’ x Length : 2’6”

Ouellet explosion proof heater

• Manufacturer: Ouellet

-600 volts , 3 phase , has thermostat on the side. -Motor is: 575 volts, 1/2 hp, 1725 rpms -The fan is 21” -Housing is 2’ wide x 2’3” height x 1’ depth -Shipping dimensions: Height: 3 ‘ x Width: 3’ x Length : 2’6”

Shanklin Omni Shrink Wrapping Machine

• Manufacturer: Shanklin
• Model: Omni

Good condition Shanklin Omni Shrink Wrapping Machines manufactured in 2007. Located in USA and other countries. Click request price for more information.