Used Processing in Canada

SS Kettle 60 Liters

Volume 60 litres -Tank depth 18” -Stainless steel -Shipping dimensions: 32”x 32” x 40” tall -On wheels -Open top -Drain on bottom -Dome bottom

FeldMeier Stainless Steel filter housing

• Manufacturer: Feldmeier

-Vessel MAWP 100 PSI AT 150 Degree F -MIN. Design Metal Temp -20 degree F at 100 PSI -Year Built 2000 -Serial No.5-202-00 -Shipping dimensions: Height - 59" x Width - 32" x Length - 20"

370 Litres stainless steel tank

-Dimensions: 28” diameter x 37” tall -Volume 98.6 US Gallon / 373 litre -Shipping dimensions: 43” length x 43” width x 62” height -Inlets/ outlets: 3” inlet on top, 2” inlet on top, 1” NPT inlet on top, 2” outlet...

10,457 Liter SS Rectangular holding tank

-Tank Dimensions: 84.5" width x 118" length x 64" height -Shipping Dimensions: 90"width x 134" length x 71" height -Bottom port: 1.25" Drain at bottom -Stationary legs are 8" all around -Bottom: Flat -Top: Open -...

4,546 Litres Vertical Jacketed Mixer Tank

-Shipping Dimensions: height 130" x 77" diameter x 236" Circumference Tank: -Tank dimensions: height 61" x 77" diameter -Stainless Steel -Estimated 1000 imperial gallons -Vertical -Jacketed -Has mixer & motor -Ma...

Cleveland Kettle

• Manufacturer: Cleveland

-Electric 208/24V -tilting axes -About 20 liters -Large pouring lip for high capacity and chunky products

Mac Conical Top Cyclone

• Manufacturer: MAC

-Shipping dimensions: length 54" x width 34" x 28" -Model CT17 -304 stainless steel -17" diameter x 12" straight side x 24" coned bottom -Approximate 200-525 cfm range

IPTS Clamp-On Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Manufacturer: IPTS Inc -Model: RPO 1-Ratio: 5:1 -HP: 1.05 -Baldor Reliance Motor: HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -...

700 Litres Stainless-Steel Tank with 3" Outlet

-Tank dimesnions: Height: 66" x Diameter 29" -Total height: 79" -Outlet: 3" -Side pipe outlet: 4.5" -Access hatch on the side -Was used on vacuum system

900 Litres stainless steel tank on 55" legs with wheels

-Comes with lid that opens 1/3 of the way back -Valve in the middle of the lid is 2" -Tilted flat bottom -Port on bottom is 1.5" -Tank dimensions: 34" tall x 46" wide, on 55" tall legs -Shipping dimensions are 92...

909 Liter Walker Jacketed Stainless Steel Surge Tank

• Manufacturer: Walker

-Model number: SB-200 -Serial number: SPG-14370 -Jacketed -Diameter: 42" -Length Straight side: 30" -Length of tank with dome bottom: 52" -Length of tank with legs and motor: 9'2" -Distance from bottom discharge ...

Blower with Baldor Motor

• Manufacturer: Baldor - Reliance

-Shipping dimensions: length 15" x width 13" x height 21" -Inlet and Outlet: 1 3/4” -HP: 2.5 -208-230/450 Volts -3450 RPM -3 Phase -Thermally Protected

Blower w/ Baldor Motor

• Manufacturer: Baldor - Reliance

-Shipping Dimensions: length 33" x width 15" x height 15" -Inlet and outlet: 2" -4.8 HP -190-220/380-415 V -2850 RPM -50 Hz -3 phase -Class F -Max pressure 105 -Max vacuum 90

2,150 Liter Mixing kettle

-On four stationary legs that are 26” tall -Cone bottom with dimples -Jacketed -lid on top, half opens -SPX Lignin mixer clamp on on top -SS -Shipping dimensions: 115” tall x 68” diameter -Tank dimensions: 48” ta...

31 Litres little jacketed tank

-Shipping dimensions: Height 42" x Width 22" x Length 25" -Stainless steel -Open top -On for legs with wheels -Cone bottom with drain port -12” top opening -Tank dimensions: 13” x 14.5” -Drain port sits 3.5” down...

Frick TDSH283L Industrial Compressor

• Manufacturer: Frick
• Model: TDSH283L

Good condition Frick TDSH283L Industrial Compressors manufactured in 2000. Located in USA and other countries. Click request price for more information.