Used machine tools in Sweden

Sunnen MBB1800G 220101

• used

• Manufacturer: Sunnen
• Model: MBB-1800

Aut. stroke, cyclestart & aut. stop. Working diameters: 1,5-95 mm | Honing length: 400 mm | Spindle speed: 200-2500 rpm | Speed: 80-310 s/min | Motor: 1 hp | Length: 720 mm | Width: 700 mm | Height: 1600 mm | Wei...

Hommelwerke 397

• used

• Manufacturer: Hommel

1970 Nagel HHM100/2,2-40 220155

• used

• Manufacturer: Nagel

Voltage: 500V Capacity: 2,2-100 mm | Spindle speed: 400-3350 rpm | Expention of tooling: 2,3 mm | Total expention: 3,1 mm | Motor: 1,1 kW | Length: 1200 mm | Width: 800 mm | Height: 1200 mm | Weight: 500 kg

Nagel HHM 40 220151

• used

• Manufacturer: Nagel

Working area: 2,5-70 mm | Spindle speed: 200-1600 rpm

Peter Wolters 2U8 220089

• used

• Manufacturer: Peter Wolters

Lapping wheel: 700 mm | Distance between grinding wheels: 80 mm | Top wheel speed: 71/ 146 rpm | Lower wheel speed: 30/ 62 rpm | Work piece: ø180x80 mm | Length: 1070 mm | Width: 2150 mm | Height: 2110 mm | Wei...

1986 Nagel VL15L-250 ET 220113

• used

• Manufacturer: Nagel

Timer, preasure regulator, tackometer, central lubrication.

Arboga EP308 220160

• used

• Manufacturer: Arboga

Grinding wheel: 200x32x20 mm | Spindle speed: 2800 rpm | Length: 550 mm | Width: 600 mm | Height: 1170 mm | Weight: 130 kg

Peter Wolters 2U8

• used

• Manufacturer: Peter Wolters

New timing relay, all bearings replaced. After that, the machine has only been test driven. Device for aut. supply of lip agent W45. Both the upper and lower disc as well as the height adjustment are motorized.

Hommelwerke 397

• used

• Manufacturer: Hommel

Roller polishing/ lapping

1986 Nagel VL15L-250 ET

• used

• Manufacturer: Nagel

Time automatic, pressure reduction, tachometer and central lubrication.

Sunnen MBB1800G

• used

• Manufacturer: Sunnen
• Model: MBB-1800

Mechanical stroke automation, cycle start and aut. Stop.

Arboga EP308

• used

• Manufacturer: Arboga

Wheel: 200x32x20 mm | Spindle speed: 2800 rpm | Length: 550 mm | Width: 600 mm | Height: 1170 mm | Weight: 130 kg

1970 Nail HHM100/2.2-40

• used

Voltage: 500V Capacity: 2.2-100 mm | Spindle speed: 400-3350 rpm | Expansion of the tool: 2,3 mm | Total expansion: 3,1 mm | Engine: 1,1 kW | Length: 1200 mm | Width: 800 mm | Height: 1200 mm | Weight: 500 kg

Nail HHM 40

• used

Work area: 2.5-70 mm | Spindle speed: 200-1600 rpm