Used Processing in Hiroshima, Japan

10000 L cylindrical vertical type

Flat top and bottom, Teflon coating inside Liquid removal: pressurized siphon type External dimensions: Ø1900×4000H

1989 Nishimura Ironworks CD-910

• Manufacturer: 西村鐵工所

Heat transfer area 10 m2 Power: 2.2kw | Purchasing area: 60Hz | Material: Disk SB42 | Quantity saved: One

Ikebukuro enamel industry 3000L

• Manufacturer: 池袋琺瑯工業

Capacity: 3000L Design Pressure: Main Unit F.V. ~ 0.19 MPaG, Jacket ATM ~ 0.39 MPaG Design Temperature: Main Unit -15 to 132°C, Jacket -15 to 151°C Type 2 Pressure Vessel Documentation Available

Kobe Steel Pantech 100L

• Manufacturer: 神鋼パンテック

Capacity: 100L Design Pressure: Body F.V. ~ 1.9, Jacket 3kgf/cm²

1999 Tomoe Kogyo PTM300

• Manufacturer: 巴工業

4000 rpm/3250 rpm, approximately 3000G Four units with a 1/165 gear ratio, one unit with a 1/125 gear ratio Backdrive specification (can be modified to single-motor) 1999, 2000, 2004 (two units), and 2007 models ...

1999 Tanabe Wiltec O-24

• Manufacturer: タナベウィルテック

Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L

2000 Tanabe Wiltech DAC-30

• Manufacturer: タナベウィルテック

30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L

Hammer mill (swing)

400V specification explosion proof type Purchasing area: 60Hz | Material: SS | Quantity saved: 1

Makino F-101

• Manufacturer: マキノ

Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP

[TANABE WILTECH] Basket type centrifuge 55inch

• Manufacturer: タナベウィルテック

Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof

1991 Mitsubishi Kakoki SJ-30T

• Manufacturer: 三菱化工機

1 set of new spare parts available Disassembly tool is available

Reaction can 5000L

Material: Wetted parts SUS304. Drive unit is removed and placed separately.

Tanabe AT-48

• Manufacturer: タナベ

Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...

2007 IHI IX-36T

• Manufacturer: IHI

Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg

2007 Sekko Sangyo SSR150

• Manufacturer: 世晃産業

18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units