Used Preparation in Tuscany, Italy

BARRERA F2 IR STABILIZER OVEN

• Manufacturer: BARRERA

BARRERA F2 IR Stabilizer Oven. In very good condition, working.

SAREMA SPRAY GLUING BENCH

• Manufacturer: Sarema

SAREMA spray gluing bench. Fully functional, in good condition.

ANGELERI LATEX GLUER

• Manufacturer: ANGELERI

ANGELERI latex gluing machine. 40 cm roller. In good, working condition.

2 PLACE GRINDER

• Manufacturer: VIMAC

2 place grinder. In good condition, working at the time of collection.

E300 Oiler Appliance

• Manufacturer: Dell’Orco & Villani

Stainless steel device for the preparation of oily emulsions, it consists of two tanks of about 300 litres each equipped with electrical resistances and thermostats for heating the emulsion.

Capacitor

• Manufacturer: Dell’Orco & Villani

The BM Beater is built on thick sidewalls in working length 2500 mm. The 860 mm-diameter reel is constructed of iron tube with 35 mm-diameter drawn steel tips. The machine is equipped with a perforated sheet meta...

CAB Loaders and Openers

Installed power: CAB/1450: 5.92 kW; CAB/1850: 5.92 kW; CAB/2500: 6.67 kW Overall dimensions: CAB/1450: 6520 x 1950 x 3190 (H) mm; CAB/1850: 6520 x 2350 x 3190 (H) mm; CAB/2500: 6520 x 3000 x 3190 (H) mm The CAB b...

CNB Loaders and Openers

Overall dimensions: CNB/1000x**: 1900+**x1000 (W) x 1500 (W) x 3200 (H) mm; CNB/1450x**: 1900+**x1000 (W) x 1950 (W) x 3200 (H) mm; CNB/1850x**: 1900+**x1000 (W) x 2350 (W) x 3200 (H) mm The CNB Loader is used fo...

CS Loaders and Openers

Overall dimensions: CS/1000: 3700 x 1450 x 2360 (H) mm; CS/1450: 3700 x 1950 x 2360 (H) mm; CS/1850: 3700 x 2350 x 2360 (H) mm The CS loader is used for the automatic feeding of fraying machines and openers. The ...

CSA Loaders and Openers

Overall dimensions: CSA/1100: 6070 x 1600 x 2360 (H) mm; CSA/1600: 6070 x 2100 x 2360 (H) mm; CSA/2000: 6070 x 2500 x 2360 (H) mm; CSA/2500: 6070 x 3000 x 2360 (H) mm The CSA Bale Opener is used for automatic ope...

CB Loaders and Openers

Overall dimensions: CB/1000x**: 2100+**x1000 (L) x 1500 (W) x 3200 (H) mm; CB/1450x**: 2100+**x1000 (L) x 1950 (W) x 3200 (H) mm; CB/1850x**: 2100+**x1000 (L) x 2350 (W) x 3200 (H) mm The CB Loader is used for te...

CAP Loaders and Openers

Installed power: CAP/1450: 6.84 kW; CAP/1850: 6.84 kW; CAP/2500: 7.59 kW Overall dimensions: CAP/1450: 6320 x 1950 x 3190 (H) mm; CAP/1850: 6320 x 2350 x 3190 (H) mm; CAP/2500: 6320 x 3000 x 3190 (H) mm The CAP b...

ALR Wolf Opener

• Manufacturer: Wolf

Installed power: AL/1000/R: 20 kW; AL/1500/R: 23.5 kW Overall dimensions: AL/1000/R: 3400 x 1620 x 1380 (H) mm; AL/1500/R: 3400 x 2120 x 1380 (H) mm The ALR wolf opener is mainly used in mixing plants for pre-ope...

BF Single Room

• Manufacturer: Dell’Orco & Villani

Installed power: BF/2500-3000: 5.2 kW; BF/3500-4000: 6.6 kW Overall dimensions: BF/2500-3000x**: 2900-3400 (L) x 1750+**x1000 (W) x 4100 (H) mm; BF/3500-4000x**: 3900-4400 (L) x 1750+**x1000 (W) x 4100 (H) mm The...

TRC Cyclone Scartaferri

• Manufacturer: Dell’Orco & Villani

The iron-rejector cyclone is a device applicable in pneumatic conveyors for the separation of heavy bodies present in the fibres and for the rejection of impurities that differ in specific weight from the fibre. ...