Used Coating & Laminating

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and 480V electric to unload semi solid metal coating material. Could we used as a graphite powder unloader. Label says it is a mold duster. Came out of a ste...

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and 480V electric to unload semi solid metal coating material. Could we used as a graphite powder unloader. Label says it is a mold duster. Came out of a ste...

GBC Titan 110 Laminator

• Manufacturer: GBC

GBC Titan 110 Laminator Serial #OHG4510 Laminator Speed Up to 3m/min Maximum Laminating Width 1070mm Dimensions 147 x 127 x 63.5 220 Volts, 16 Amps

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and electric to unload semi solid metal coating material. Could we used as a galvanized or power coating or graphite. Type powder. No sure what It did or wha...

Professional Laminating System EB-1200 Exact Bind

• Manufacturer: Professional Laminating Systems

Professional Laminating System EB-1200 Exact Bind Serial X-183

42" REDEX LAMINATOR MODEL THERMO LAM 3

• Manufacturer: Redex
• Model: THERMO LAM 3

42” Redex laminator. 2-ply thermal lamination system. Age 1999. Model Thermo Lam 3. MAP Systems Model LCP-10, serial # 701022, age 1999. MAP Systems Model LAM-42, serial # 651004, age 1999. 300 feet per minute. W...

2000 ProSeal 44 Laminator 2000

ProSeal 44 Laminator, 2000 Serial #4400700 Maximum working width: 44" | Process speed: 1 ft/min | Roller line pressure: 0.8 N | Process temperature: 311-320°F | Nip settings: 0 (closed nip), 1/16", 1/8", 3/16" an...

GBC Catena 105 40" Laminator

• Manufacturer: GBC

GBC Catena 105 40" Laminator Serial #TH00343G Maximum doc size: 40" | Speed: 1.5' - 5' per minute | Compatible film: 1.5 - 10mil. | Core diameter: 1" or 2.25" (3" Core Adaptor Available) | Weight: 154lbs. | Warm...

65" Master VT-600 Cold Laminator

• Manufacturer: US Tech Inc.

65" Master VT-600 Cold Laminator Serial #AP1205150

Evans Midwest LT4280 Layup Table/ Indexing Table + Motorized Laminate Rack

• Manufacturer: Evans

Evans Midwest has a NEW updated LT4280 Layup Table and it is available with a NEWLY designed Motorized Laminate Rack. This is the most cost effective option in all of North America! (*Note: Unit is shown with the...

63" EGAN MAYER ROD COATING STATION

• Manufacturer: Egan

63" Egan Mayer rod coater station. Last used in silicone coating line

Crathern Laminator Casemaker

• Manufacturer: Crathern

Full Lamination and Turned Edge Line Consisting of the Following: Sheet Gluer – Model CE-26 Automatic Spotter – Model FB-1 Casemaker / Wrapper Press Rollers Delivery Table At Capital Equipment Solutions, ...

1972 PRO ECO Coating Machine

• Manufacturer: Pro Eco

One (1) used prime-coat coating machine from a coil coating line - Two (2) roll design - Two side coating Basic specs from the line it comes from: Used 54" Coil Coating Line - Manufacture - ProEco / 1972 - Nomi...

1975 HUNTER COIL COATING LINE

• Manufacturer: Hunter

60" Aluminum Can-End Coating Line: CC-157 - Single coat line for light gauge aluminum coatings/finishes. - Sold "as is, where is" EXW on foundation USA. Strip Width: - 60" max / 1524 mm - 66" w/o tension levelin...

2025 KGA Anode Coating Line

• Manufacturer: KGA

Key Technical Specifications Overall Dimensions 11,810 × 1,878 × 2,863 mm Equipment Weight 10 tons (approximate) Maximum Web Width 350 mm Maximum Coating Width 300 mm Foil Thickness Range 6-30 μm (Cu), 10-30 μm (...