Used Agitators, Blenders, Mixers

Gast Pneumatic Agitator Drives

• Manufacturer: Gast

Gast Pneumatic Agitator Drives Used Gast pneumatic agitators, clamp mounted, with stainless steel enclosure over motor.

Marion Paddle Mixer/Blender - 35cu.ft. - Carbon Steel

• Manufacturer: Rapids Machinery Company

Mixer was tested as seen in video - Unit was connected directly to power without any soft start or control box - Currently safeties and air powered locks have not been tested and are not functioning. Unit is USED...

0.75 HP Anchor Agitator Drive

0.75 HP Anchor Agitator Drive Used 0.75 hp Anchor agitator drive, 230/460 volt motor drive, mounted on stainless steel bridge, designed for approximately 14.5" diameter x 11.5" deep tank, stainless steel shaft an...

8 Quart P-K Twin Shell Blender, S/S, Bar

• Manufacturer: Patterson-Kelley

8 Quart P-K Twin Shell Blender, S/S, Bar Used 8 quart Patterson Kelley twin shell blender, stainless steel construction, liquid bar driven by .75 hp, 115/230 volt motor, 1/6 hp, 115 volt shell drive, serial# LB-7...

40 Cu Ft Gemco Double Cone Blender, S/S

• Manufacturer: Gemco

40 Cu Ft Gemco Double Cone Blender, S/S Used 40 cu ft Gemco double cone blender, stainless steel construction, rated 65#/cu ft max material density, on stand with 20 hp, 230/460 volt motor drive, serial# B-84200,...

85 Cu Ft Walter Equipment Ribbon Blender, S/S

• Manufacturer: Walter Equipment

85 Cu Ft Walter Equipment Ribbon Blender, S/S Used 85 Cu Ft Walter Equipment Ribbon Blender, model 085, stainless steel construction, serial# R140, built 1980.

30 Cu Ft Gemco Double Cone Blender, S/S

• Manufacturer: Gemco

30 Cu Ft Gemco Double Cone Blender, S/S Used 30 cu ft Gemco double cone blender, stainless steel construction, rated 100#/cu ft max material density, provision for internal bar and gemcomatic loader/unloader(both...

150 Cu Ft Ribbon Blender, C/S, 20 HP

150 Cu Ft Ribbon Blender, C/S, 20 HP Used 150 cu ft ribbon blender, carbon steel construction, approximately 48" wide x 144" long trough, driven by 20 hp motor, with drag conveyor bottom hopper, with controls and...

100 Cu Ft Aaron Process Ribbon Blender, S/S

• Manufacturer: Aaron Process

100 Cu Ft Aaron Process Ribbon Blender, S/S Used 100 Cu Ft Aaron Process ribbon blender, stainless steel construction, approximately 46" wide x 94" long trough, double ribbon, outboard roller bearings, packing gl...

1 HP SEW-Eurodrive Side Agitator Assembly

• Manufacturer: SEW-Eurodrive

1 HP SEW-Eurodrive Side Agitator Assembly Used 1 hp SEW-Eurodrive side entering agitator drive, type KAF47DRE80M4/DH, 230/460 volt, 3 phase, 60 hertz, 1740 rpm motor, 15.86:1 ratio, stainless steel shaft and blad...

10 HP Pfaudler Agitator Drive, 5 DTW

• Manufacturer: Pfaudler

10 HP Pfaudler Agitator Drive, 5 DTW Used 10 hp Pfaudler agitator drive, size 5DTW, with seal housing and 10 hp flange mounted xp motor, serial# 500011-P.

5 HP Lightnin Agitator Drive, 125 RPM

• Manufacturer: Lightnin

5 HP Lightnin Agitator Drive, 125 RPM Used 5 HP Lightnin agitator drive, model 216-TESS-5.2, right angle design, 125 RPM output, 14.09:1 ratio, less motor.

8 QT P-K Twin Shell Blender Shell, S/S

• Manufacturer: Patterson-Kelley

8 QT P-K Twin Shell Blender Shell, S/S Used 8 qt Patterson-Kelley twin shell blender shell, stainless steel construction, with solid end caps.

30 Cu Ft Gemco Slant Cone Blender, S/S

• Manufacturer: Gemco

30 Cu Ft Gemco Slant Cone Blender, S/S Used 30 Cu Ft Gemco slant cone blender, stainless steel construction, with high speed bar with motor drive, Gemco-Matic discharge on stand with motor drive and positioning m...

4 Quart GlobePharma MaxiBlend MB-IVV Twin Shell Blender

• Manufacturer: GlobePharma

4 Quart GlobePharma MaxiBlend MB-IVV Twin Shell Blender Used 4 quart GlobePharma MaxiBlend twin shell blender, model MB-IVV, with (2) 4-quart stainless steel blending shells, 110 volt, serial# 041531248, built 2015.