Used Processing in New Jersey, USA

Glasslined Pfaudler RS Batch Type Body Only Reactor - IPP# 241036

• Manufacturer: Pfaudler

Shell rated 150 psi/FV @ 450 degrees F jacket rated 150psi/FV 450 degrees F with welded 2:1 elliptical heads Heads=0.813", Jacket =0.5"

Stainless Steel Austenitic HINKE Batch-Type Agitated Reactor - IPP# 231081

• Manufacturer: HINKE

internal pressure -1/6 bar @ -20/200 degrees C (9700 liter), jacket -1/10 bar @ -20/200 degrees C (235 liter) 3-3.6kw, 3/50/60/380-415/660-720/440/480 volt 1415-1695 rpm Side jacket openings: 2-80mm CE 0408 & TUV...

Stainless Steel Clad Batch-Type Agitated Reactor - IPP# 228077

Vessel serial # 3895 Jacket serial # 3897 with welded 2:1 elliptical heads Jacket connections are Three 2", and one 3".

Stainless Steel 316 Clad Pemco Batch-Type Agitated Reactor - IPP# 89620

• Manufacturer: Pemco

Shell OD: 81" Jacket OD: 84"

Glasslined DeDietrich CSA Batch Type Body Only Reactor - IPP# 226616

• Manufacturer: De Dietrich

-Coils on Jacket are totally shot.

Glasslined Pfaudler RA Batch-Type Agitated Reactor - IPP# 238303

• Manufacturer: Pfaudler

100/90# DTW Drive

Glasslined DeDietrich STA Batch-Type Agitated Reactor - IPP# 207128

• Manufacturer: De Dietrich

maincover serial 52383 Glass type: 3008 motor 3/50/380 volt

IPP# 601405, GTL Wax Plant 1,170 BPD Oil and Gas

1,170 barrel-per-day Fischer-Tropsch (FT) Gas-to-Liquid (GTL) Wax plant targeting the production of higher-value wax products. Product Mix: Naphtha: High purity liquid paraffins targeted for chemical feedstock, o...

Carbon Steel Separators Screener - IPP# 247010

• Manufacturer: Sweco

Motor 10HP, RPM 1200,60 HZ, 3 PHASE, VOLTS 230/460, Frame 256T. Synthetic balls

Stainless Steel 317 JENS OLSEN Batch-Type Agitated Reactor - IPP# 207122

• Manufacturer: JENS OLSEN

Agitated Tank with pipe coil (CS). 2 bar in pipe coil. Motor 230;400V/3,0kW/50Hz

Chrome Roll Mill - IPP# 71978

Additional Info:

Roll Mill - IPP# 104128

Additional Info:

Roll Mill Chrome - IPP# 71979

• Manufacturer: Farrell

Additional Info:

Stainless Steel 316 Colloid Mill - IPP# 216274

• Manufacturer: Stalwart International

316SS (product contact), sifter, polished with mirror finish, Multi Mill ,with Bead impact knife blade. Sanitary and cGMP construction. 1400 mm height, 330mm diameter, 316 SS perforated screen .5 mm thick, 316SS ...

Votator 0.84 m² (9 ft²) Stainless Steel 316 - IPP# 72017

• Manufacturer: Votator

scraped surface heat exchanger Internal rotor is Belt driven by 5 HP, 3/60/230/460 volt, 1160 rpm TEFC motor packing glands on the shaft