Used Granulators & Pelletizers

BALL & JEWEL HDB-3030X GRANULATOR 14558

• Manufacturer: Ball & Jewell

Ball and Jewel model HDB-3030X granulator, S/N 6536-119914. 30″ x 30″ feed throat, 3 knife open rotor, 2 bed knife, 100HP 230/460V 1,160 RPM motor. 30″ x 38″ tray feed hopper with an infeed height of 77″. 6″ airv...

CUMBERLAND S-200 SCREENLESS GRANULATOR 17800

• Manufacturer: Cumberland

Cumberland model S-200 screen less granulator, S/N 00862, 11″ x 11″ cutting chamber, two “S” cutters, 2 HP 230-volt 1740 RPM motor – wired 240-volts, robot / top hand feed hopper, gravity discharge, on casters, c...

NISSUI SA24 SCREEN-LESS GRANULATOR 17522

• Manufacturer: Nissui

Nissui Corporation model SA24 screen-less granulator, S/N SA240124, 11″ x 11″ cutting chamber with two “S” cutters, 2 HP 230/460-volt motor, top hand feed hopper, gravity bottom discharge, includes starter and co...

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

NISSUI FNSK-15SC SCREENLESS GRANULATOR 14366

• Manufacturer: Nissui
• Model: FNSK-15SC

Nissui model FNSK-15SC screenless granulator. S/N 02-0002-05. 10″ x 13″ feed throat, S-cutter with 3/16″ particle size. 1.5kW 460V motor, robot hand top infeed, split chamber opening for easy cleaning, bin discha...

NELMOR G810LS LOW SPEED GRANULATOR 18777

• Manufacturer: Nelmor

Nelmor model G810LS low speed granulator. S/N 00L04331. 8″ x 10″ feed throat. 3 knife solid rotor with 2 bed knives. Rotor powered by a 3 HP (2.2 Kw) 460-volt motor via gearbox and chain & sprocket drive system. ...

PALLMAN PS6-6 RUBBER GRANULATOR 17877

• Manufacturer: Pallmann

Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rat...

MPG CS-2248 GRANULATOR WITH FEED 17478

MPG model CS2248 granulator S/N F726. 22″ x 48″ feed throat. 9 knife staggered open rotor, 2 bed knife (6 pcs). 150 HP 460-volt 1785 RPM motor. Water cooled cutting chamber. Modified and closed off conveyor style...

NELMOR G1436MB SHEET FEED GRANULATOR 16953

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right ...

CONAIR / MARTIN CK-1418 GRANULATOR 17166

• Manufacturer: Conair

Conair / Martin model CD-1418K granulator. S/N 120.1828. 14″ x 18″ feed throat, 3 knife open rotor, 2 bed knife, tangential cutting chamber, 25HP 460V motor. Rear facing, KB style insulated hopper, insulated body...

SPROUT 9 X 11 GRANULATOR 12690

Sprout 9″ x 11″ feed roll granulator, no S/N. 9″ x 11.5″ feed throat, 3 knife open rotor, 1 bed knife cutting chamber, 20HP 230/460V motor. Side feed tray feed hopper with front mounted 3″ x 9″ steel knurled feed...

CPM 7122 Granulators & Pelletizer

• Manufacturer: CPM
• Model: 7122

Good condition CPM 7122 Granulators & Pelletizers. Located in Netherlands and other countries. Click request price for more information.