Used processing in Germany

2020 INOXDUBRA DFIFPCP

• used

• Manufacturer: INOXDUBRA

Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity o...

ASIMA mill BAUERMEISTER - type UTSA-02

• used

• Manufacturer: Bauermeister

Lentils moulding machine 420 mm working width

• used

• Manufacturer: McIntyre

Lentil moulding machine with a pair of rollers approx. 420 mm working width and 300 mm roller diameter. With matching water recooler.

.. TS 2000 / 3 / VA

• used

• Manufacturer: MINOX Maschinenhandels GmbH

Tumbler sieve machine used 3-deck machine, screening in 4 fractions.

Condux CSK 680

• used

• Manufacturer: Condux

beater mill; Drive: 75 kW | 6 x strainer baskets: 4 - 20 mm. | Engine: 75 kW | 6 sieve baskets: 4 - 20 mm.

Bauermeister USCHL/UZL

• used

• Manufacturer: Bauermeister

Material: Mild steel | Material: Mild steel

Alexanderwerk Reibschnitzler 350

• used

• Manufacturer: Alexanderwerk

Friction mill Drive: 1,5 KW | Material: Product-contact areas made of stainless steel | Material: Aluminium

Alpine B 315

• used

• Manufacturer: Alpine

Mill Material: Product touched areas in stainless steel / product touched parts in stainless steel | Material: Stainless steel

2010 Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine

• used

• Manufacturer: Alpine

Nautical vacuum dryer - The Nautical vacuum dryer. · It is almost new we bought it 5 years ago but we used it one or two times. · It’s working volume is 350 liters · The water heater and the vacuum pump are o...

1973 BATES 50FF/2-2300

• used

• Manufacturer: BATES

2 weighing bagging modules Bagging system for valve bags up to 50 kg with scales used control unit approx. 2 m conveyor belt The system has already been dismantled. The system comes from a decommissioned grain mi...

MÜLLNER & LUX KG GMDF.A

• used

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Twin-shaft flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shafts of the mixer are divided into three sections. each is d...

MÜLLNER & LUX KG GMDF.A

• used

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Twin-shaft flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shafts of the mixer are divided into three sections. each is d...

MÜLLNER & LUX KG MLRE-A

• used

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shaft of the mixer is divided into three sections. each is driven by its ...

2001 Ismar VHS

• used

• Manufacturer: Josef Unsold

Hammer Mill Machine is sold without sieves. Application: - For grinding grains/nuts (very fine) - For grinding grains/nuts (fine) - For grinding grains/nuts (medium-fine) - For grinding medium grains/nuts, breadc...

Granulating sieve Frewitt MGI 205

• used

• Manufacturer: Frewitt

Artikel# 2295 Granulating sieve Manufacturer: Frewitt Type: MGI – 205 Capacity: up to 1,000 kg/hour (depending on product) Motor power 0.75 kW-1.0 kW Dust-tight bearings inside and outside, infinitely variable ro...