Building Filters

Used Chemineer Processing

Trusted Seller
Chemineer-Kenics 8-KME-FRP 4 Mixer #31299
- Manufacturer: Chemineer
Chemineer-kenics Mixer, Model 8-kme-frp 4, Max Pressure 150 Psi, Max Temp 180 F, 52" Length, 8" Inner Diameter, With Flange Mounting Rings
Fitchburg, MA
Trusted Seller
Chemineer 60PB1S Side Mount Agitator #44046
- Manufacturer: Chemineer
Chemineer 60PB1S Side Mount Agitator, 40.5” Shaft Length, Approximate 40” Diameter 3-Vane Stainless Steel Propeller
Fitchburg, MA
Trusted Seller
Chemineer 4GTD-10 Top Mount Agitator Power End #43673
- Manufacturer: Chemineer
Chemineer 4gtd-10 Top Mount Agitator Power End, 10 Hp, 1200 Output Rpm
Fitchburg, MA
Trusted Seller
Chemineer 60PB1S Side Mount Agitator Frame and Motormount #43780
- Manufacturer: Chemineer
Chemineer 60pb1s Side Mount Agitator Frame And Motormount
Fitchburg, MA
Gaspar 30-Gallon Reactor – 316L SS, 150 PSI, 5 HP Chemineer Agitator
- Manufacturer: Chemineer
50467035 Used Gaspar Reactor, 30 Gallon. 316L Stainless steel construction, approximately 24" diameter x 24" straight side, Elliptical removable top, elliptical dish bottom. Internal rated 150 psi and full vacuum...
Belvidere, IL
1/2 Hp CHEMINEER VERTICAL DOWN MIXER #B-4300
- Manufacturer: Chemineer
1/2 Hp CHEMINEER VERTICAL DOWN MIXER Serial number 525557-1 1/2 Hp, 1750 rpm, 230/460 v, 3 ph, Inverter Duty motor Gear reduced, 4.71-1 ratio, 371 rpm shaft speed We make up stainless steel shafts to order. (1) a...
Fall River, MA, USA
CHEMINEER AGITATOR
- Manufacturer: Chemineer
ONE (1) SURPLUS AGITATOR; MFG: CHEMINEER; SN: 598497-2; MODEL: 22GTNC-7.50; POWER RATED: 7.5 HP; MOTOR RPM: 1800; OUTPUT RPM: 56; NO MOTOR; SHAFT: 316SS; 2" OD X 108" LONG; HUB: PITCHED INCLINED TYPE...
Houston, TX
CHEMINEER AGITATOR
- Manufacturer: Chemineer
MODUFLUX TURBINE AGITATOR BY CHEMINEER, MAV-250-726, S/N 1-15746. UNIT IS VERTICAL FLANGE MOUNT (18") WITH A CUT OFF 3" DIAMETER STAINLESS STEEL SHAFT. GEAR BOX IS BELT DRIVEN WITH A TWO SPEED BALDOR MOTOR 1740/6...
Houston, TX
CHEMINEER AGITATOR
- Manufacturer: Chemineer
MODEL: VIN-30; SN: 1-94290-1; RPM: 1750; ALUMINUM SHAFT; W/3 BLADES ON A 7" SPAN; 1-1/2" DIA. X 44" LENGTH; DRIVEN BY 3 HP MOTOR; 1730 RPM; 230/460 VOLTS; 8 BOLT HOLES ON FLANGE.
Houston, TX
CHEMINEER AGITATOR
- Manufacturer: Chemineer
ONE (1) SURPLUS; USED; AGITATOR; TOP ENTRY MOUNTED; SN: 176564-1; DRIVEN BY 30 HP MOTOR; 1200 RPM; IMELLER RPM: 37 RPM OUT; TEFC; WESTINGHOUSE MOTOR; TEFC; BALL BEARING; 1180 RPM; FR: 326T; 460 VOLTS; SHAFT STUB ...
Houston, TX
5 Hp Chemineer Right Angle Drive 32:1 ratio #B-4530
- Manufacturer: Chemineer
5 Hp Chemineer Right Angle Drive Rating is estimated by size. Has approximately 32:1 ratio 14 x 18 x 13 inch tall gearbox, o/a 39 inch long x 18 inch total height Has 6-bolt 7.25 inch od hub, turns freely (1) ava...
Fall River, MA, USA
Trusted Seller
CHEMINEER 1GTNC 5 HP Process Mixer Agitator Model RPM 1800 Process Engineering Equipment
- Manufacturer: Chemineer
“Used and in good working condition.” This 5HP Chemineer dual blade agitator process mixer is a model 1GTNC-5. Output RPM is 155-31. Operates from -10°F to 125°F. Blades are 12" x 3.75" of which are there are thr...
$5,200 USD
Chico, TX
1/2 Hp CHEMINEER CLAMP MOUNT MIXER 1 ph XP #B-4134
- Manufacturer: Chemineer
(2) 1/2 Hp CHEMINEER CLAMP MOUNT MIXER model 3JTC-0.50 1/2 Hp, 1750 rpm, 115/230 volt, 3 ph, XP Direct drive. Takes a 1 inch diameter shaft included with a single prop (2) available
Fall River, MA, USA
CHEMINEER STATIC MIXER
- Manufacturer: Chemineer
ONE (1) STATIC MIXER; MFG. BY CHEMINEER; IN-LINE MIXER; "KENICS" MIXER; SIZE 8" X 24"; FLANGED ENDS; MODEL: 8KMR2; SN: 1-06916-01; MFG. DATE: 2000; 300 PSI @ 400F.
Houston, TX
CHEMINEER AGITATOR MIXER
- Manufacturer: Chemineer
ONE (1) SURPLUS AGITATOR MIXER; MFG BY CHEMINEER; MODEL: SAG-75-228; SN: 1-74724-3; 380 RPM; 26" LONG SHAFT; 10" FLANGE X 2" X 26" LENGTH; STAINLESS (CHECK MATERIAL).
Houston, TX