Used Incubators in Netherlands

Binder CB 210 CO₂ Incubator

• Manufacturer: Binder

Auto-sterilization with hot air at 180°C Double-pan humidification system with condensation protection

Sanyo MIR-153 Refrigerated Incubator

• Manufacturer: Sanyo
• Model: MIR-153

Weight: 69 kg | Temperature range: -10°C to +50°C | Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID control) | Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load) | Temperature program o...

Binder CB 220 CO2 Incubator

Auto-sterilization with hot air at 180°C Double-pan humidification system with condensation protection Excluding connection gas kit (see pictures for kit)

Forma Scientific Model 3923 Incubator

• Manufacturer: Thermo Fisher Scientific
• Model: Forma

Including Three-Tier Cell Roller Base Capacity : 821.2LCabinet Material: Cold-rolled steel, powder-coated cabinetShelves: 6 supplied (19 max.)Temperature ramp and soak, up to 24 stepsTemperature Range: 0° to 60°...

Thermo Steri-Cycle Model 381 Incubator

• Manufacturer: Thermo (Scientific)
• Model: Steri-Cycle

CO₂ module is defective and incubator is retrofitted to a normal incubator.

Thermo Forma Steri Cult 3851/3311M C02 Incubator

• Manufacturer: Thermo Fisher Scientific
• Model: Forma 3851

Technische specificaties The thermo scientific forma steri-cult co2 incubator, type 3851/3311m, combines the best components available in one incubator: CO2 sensor, precise microprocessor controls, active humidit...

Forma Scientific Model 3923 Incubator

• Manufacturer: Thermo Fisher Scientific
• Model: Forma

Including Three-Tier Cell Roller Base Capacity : 821.2LCabinet Material: Cold-rolled steel, powder-coated cabinetShelves: 6 supplied (19 max.)Temperature ramp and soak, up to 24 stepsTemperature Range: 0° to 60°...

2020 Gram BioPlus ER660W Incubator

• Manufacturer: Gram
• Model: Bioplus

Weight: 152 kg | Temperature range: 0°C – 50°C | Alarms: Acoustic and visual, High/Low temperature alarms and door alarm | Access port: 1 pcs. Ø 24.5 mm | Material interior: Stainless steel | Material exterior: ...

Thermo Steri-Cycle Model 381 Incubator

• Manufacturer: Thermo Fisher Scientific
• Model: Steri-Cycle

CO₂ module is defective and incubator is retrofitted to a normal incubator.

Thermo Steri-Cycle Model 381 Incubator

• Manufacturer: Thermo (Scientific)
• Model: Steri-Cycle

CO₂ module is defective and incubator is retrofitted to a normal incubator.

Boekel Scientific Cooled Incubator 165000-2

• Manufacturer: Boekel Scientific

Boekel Scientific Cooled Incubator 165000-2 The Boekel Scientific touchscreen cooled incubator is designed as the most advanced incubator for microbiological work. The thermoformed plastic interior is easy to cle...

Edmund Buhler TH10 Shaking Incubator

• Manufacturer: Edmund Bühler

Edmund Bühler TiMix shaker equipped with a TH 10 incubator hood.

Elbanton LTKB 650 Cooled incubator

• Manufacturer: Elbanton

The used Elbanton LTKB 650 is a large cooled incubator with 4 perforated stainless steel shelves, glass inner door and 6 sockets in the interior. Furthermore, the cooled incubator is equipped with switchable fluo...

Sartorius Certomat BS-1 Shaking Incubator

• Manufacturer: Sartorius / Essen / Intellicyt
• Model: Certomat

The Sartorius Certomat BS-1 shaking incubator is suitable for growing bacteria, yeasts, insects, and plant cells in a temperature-controlled environment from 8°C above ambient to 70°C. Features: Adjustable mass c...

2020 Binder CB 170 CO2 Incubator

• Manufacturer: Binder

This new, unused CO2 Incubator was purchased for an MBO course in Laboratory Technology, but was subsequently not used. Auto sterilization by hot air 180 °C Double shell humidification system with condensation pr...