Agriculture » Applicators » Pull-type Applicators

Search By Manufacturer

Search By State

Building Filters

780

Used Pull Type Applicators

  • 2015 Kverneland Ikarus S38

    2015 Kverneland Ikarus S38

    • Manufacturer: Kverneland
    • Model: Ikarus S38

    Manual, 460/85R38 Tyres, Tank 4000L, Chemical tank, HSS-Boom 21m, Triplet nozzles, Inspected 12.6.2024 Coming to Kärsämäki

    $29,236 USD
    Kärsämäki, Finland
  • 2021 Amazone UF 2002 #300375163

    2021 Amazone UF 2002 #300375163

    • Manufacturer: Amazone
    • Model: UF2002

    UF 2002 (0010) Used AMAZONE mounted sprayer UF 2002 (0020) Rear lighting (0030) Actual tank volume 2100 liters (0040) Rinsing water tank 200 liters (0050) induction hopper (0060) Pump equipment 300 l/min (0070) W...

    $36,985 USD
    Uelzen, Germany
  • 2016 Dammann 5830 Classic -

    2016 Dammann 5830 Classic - Dual-Air-System

    • Manufacturer: Dammann

    Operating hours: 2759 Hours | On-board computer: Yes | Working width: 30 m | Hydraulically foldable: Yes | Trailing device: Yes | Filling amount: 5800 l | Construction type: trailed sprayer | Part width section ...

    $62,815 USD
    Gülzow-Prüzen, Germany
  • Moteska 3500L

    Moteska 3500L

    • Manufacturer: Moteska

    Preparation filler. Tank washer. Fresh water tank. 4 partial shut-offs. wheels: 270/95x48.

    $15,499 USD
    Skåne County, Sweden
  • 2013 Joskin QUADRA 18.000 TS

    2013 Joskin QUADRA 18.000 TS #300390431

    • Manufacturer: Joskin
    • Model: Quadra
    • Tank capacity: 18 liter

    QUADRA 18.000 TS used Joskin pump tanker with standard equipment terminal Working width: 21 m cardan shaft Tandem axle Tires: 750/60 R30.5 Vredestein Forced steering K80 hitch Load sensing PTO shaft 540 With ligh...

    $46,084 USD
    Fritzlar, Germany
  • 2024 LEEB 1.8 CS #300114038

    2024 LEEB 1.8 CS #300114038

    • Manufacturer: LEEB

    1.8 CS Horsch Leeb 1.8 CS in standard equipment 00345265 Cable Termin.-Schlep. 00346042 Fs. SectionControl 00346051 Fs. Track Leader II 00346471 Ter. Touch 800 98000103 Stand.partialbr.3levels (12) P360015002 Ver...

    $76,200 USD
    Fritzlar, Germany
  • 1997 Evrard METEOR 2800

    1997 Evrard METEOR 2800

    • Manufacturer: Evrard
    • Model: METEOR 2800

    2008 Evrard Meteor sprayer Capacity 2800l 24m steel boom DPAE Four sections Incorporator Tires 270/95R48

    $9,965 USD
    Chemaudin et Vaux, France
  • 2012 Caruelle OLYMPIA 250 S

    2012 Caruelle OLYMPIA 250 S

    • Manufacturer: Caruelle
    • Model: OLYMPIA 250 S

    2012 Caruelle sprayer 2500l capacity 28m steel boom Seven sections DPAE Semi-continuous circulation In-cab control unit

    $11,137 USD
    Chemaudin et Vaux, France
  • 2007 Rauch AXIS 30.1 R

    2007 Rauch AXIS 30.1 R #300358041

    • Manufacturer: Rauch
    • Model: AXIS 301 R

    AXIS 30.1 R (0010) Used smoke spreader (0020) Throwing disk S4-VxR-18-28m (0030) Throwing disk S2-12-18m (0040) Attachment XL 1800 (0050) Telimat T 25 (0060) Lighting with warning signs Contact person: Heinrich ...

    Söhlde, Germany
  • 2020 John Deere M952i

    2020 John Deere M952i

    • Manufacturer: John Deere
    • Model: M952i
    • Hours: 9,642 hour
    • Tank capacity: 5,200 liter

    Operating hours: 9642 Hours | Working width: 27 m | Hydraulically foldable: Yes | Trailing device: Yes | Filling amount: 5200 l | Slope control: Yes | Elevation adjustment: Yes | Construction type: trailed spray...

    $49,430 USD
    Rosdorf, Germany
  • 2020 John Deere M952i Premium

    2020 John Deere M952i Premium

    • Manufacturer: John Deere
    • Model: M952i
    • Tank capacity: 5,200 liter

    Induction hopper Hand wash tank Slope control Height adjustment Hydraulic folding Follow-up system Section control Without display Without receiver

    $49,430 USD
    Rosdorf, Germany
  • 1995 BBG S 300

    1995 BBG S 300

    • Manufacturer: BBG
    • Model: S 300
    • Boom width: 18 meter

    branded trailed sprayer Tank capacity approx. 3000 liters self-steering axle Boom 18 m Triple nozzle body induction hopper 4 boom sections Müller computer PTO shaft In need of repair Support foot / wheel, inducti...

    Neuhof, Germany
  • 2013 John Deere R952 i

    2013 John Deere R952 i

    • Manufacturer: John Deere
    • Model: R952i
    • Hours: 2,605 hour
    • Tank capacity: 5,200 liter

    Operating hours: 2605 Hours | On-board computer: Yes | Working width: 24 m | Hydraulically foldable: Yes | Trailing device: Yes | Filling amount: 5200 l | Slope control: Yes | Elevation adjustment: Yes | Pumping...

    $28,179 USD
    Heiligengrabe, Germany
  • 2011 Inuma MARATHON K 11/AS

    2011 Inuma MARATHON K 11/AS 10036 #300456603

    • Manufacturer: Inuma

    MARATHON K 11/AS 10036 (0010) INUMA Marathon K 11 / AS 10036 field sprayer (0020) 40 Km/h (0030) Year of construction 2011 (0040) trailed (0050) Boom 36 m (0060) induction hopper (0070) Attachment: towing jaw, K8...

    $26,887 USD
    Calbe, Germany
  • 1997 Hardi Commander 21-HAC

    1997 Hardi Commander 21-HAC

    • Manufacturer: Hardi
    • Model: Commander
    • Tank capacity: 2,800 liter
    • Boom width: 21 meter

    On-board computer: Yes | Working width: 21 m | Hydraulically foldable: Yes | Filling amount: 2800 l | Elevation adjustment: Yes | Construction type: trailed sprayer | Inductor: Yes | Hand wash canister: Yes | Pa...

    $9,980 USD
    Schöntal, Germany
3435363738

Overview

Pull-type applicators are agricultural equipment designed to be towed behind a tractor. They are used to apply fertilizers, herbicides, pesticides, and other treatments to crops and soil. These machines are highly efficient for large-scale farming operations, ensuring even distribution of materials over extensive areas, which helps in optimizing crop yield and health.

FAQ

What should I consider when buying a used pull-type applicator?

Check the overall condition, including the frame, hoses, nozzles, and pump. Ensure there are no leaks or wear and tear that could affect performance. Review any maintenance records available.

How do I safely transport a pull-type applicator?

Use a flatbed trailer and secure the applicator properly to prevent movement during transit. Ensure all moving parts are locked and protected to avoid damage.

What maintenance is required for a pull-type applicator?

Regularly inspect and clean nozzles and hoses, check for leaks, and ensure the pump is functioning correctly. Lubricate any moving parts and follow the manufacturer's maintenance schedule.