Used Processing in Ontario, Canada

Poly Tank on Steel Base

• Manufacturer: Poly Gator

-Capacity: -844.44 Imperial gallons -1,013 U.S. Gallons -3,834 Liters -Manufacturer: Poly Gator -Liquid holding tank -Cone bottom -Inlet & outlet: 2.5" -Manhole on top -Tank dimensions: -Height straight side: 32....

13,122 Liter Carbon Steel Flat Bottom Tank

-Straight side height: 12.4' or 148" -Diameter: 6.11' or 83" -Shipping dimensions: -Height: 13.10' or 166" -Diameter: 88" or 7.4' -Approximate weight: 3,600 pounds -Manhole on top -Inlet & outlet: 2"

60" Sweeco Separator

-Last use was for lime dust -60" diameter -Model number is MXCCC152CBTSFTLWC -Serial number SS3105-A0C/11 -2.5HP -3 Phase -5/5 volts -3.4 AMPS -1160 RPM -Shipping dimension: 75" the widest diameter x 50" tall -We...

Nettco 0.33 HP Clamp-on Mixer

• Manufacturer: Nettco

-Comes with Genesis AC motor speed control hybrid drive -Model: NSPG-100 -SN: P72416A-1 -Baldor Reliance Motor: HP 0.33, Volts 230/460, Amps 1.6/0.8, RPM 1725, Hz 60, Phase 3

Insulated Stainless Steel Tank with Two Direct Immersion Heaters

-Capacity: 121.38 Imp gallon -Manufacturer: Falcon -Tank dimensions: Diameter: 35" x Height: 35" x outlet: 1" -Two sided hinge lid -Stainless steel -Two direct immersion heaters with temperature control -60-250F ...

Hartzell Curved Blower Fan

• Manufacturer: Hartzell

-Inlet diameter: 29" -Outlet height: 30" -Outlet width: 22.5" -Manufacturer: Hartzell Air Movement -Model number: A03-9-243BC100ABFC03 -CFM: 13500 -SP: 7 -Mtr. HP: 25 -Fan RPM: 2110 -Mtr. RPM: 1750 -Volts: 230-46...

Armstrong Heater/ HD steam unit

• Manufacturer: Armstrong

-Manufacturer: Armstrong-Hunt Inc -Model: AQ-181-HS-T12-Special -Design: 350 PSIG @ 650 degrees F -SN: 6374086C -CRN: 0H0506.6C -Baldor. Reliance Motor: HP: .75 -Volts: 115/208-230 -Amps: 6.3/ 3.4-3.15 -RPM: 1755...

922 Liter Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

Food grade mixer

-Food grade -Mixer model: W-600 -220V -3 Phase -60HZ

2,873 Litres tank with heater coil

-Tank dimensions: 61” diameter x 60” tall -750 us gallon -Shipping dimensions : 73” diameter x 85” -Heating coils on the outside of tank -4 Stationary legs -Dome bottom

Tank on legs

-3 Legs and stationary, -Open top, -34" from the ground to the bottom of the tank, -83" tall, Stainless steel, -78.27 IMP

Sly Dust collector

• Manufacturer: Sly

-Model number: HCF-2-1-26 -seriel:17488 -Dimensions: Inlet: 7” x Outlet: 8” -Shipping dimensions: H-130” x W-53” x L-80”

Lightnin Mixer

• Manufacturer: Lightnin

Model#: NLDG-75, Volt:230/460, HP:1, AMPS: 4.4/2.2, RPM:1725,

Tank with Pneumatic Lightnin Mixer

• Manufacturer: Lightnin

-Shipping dimensions: length 35" x width 35" x height 49" -316 Stainless -M.A.W.P: 0.42V/10 PSIG -Temp: 300 F -60 L -2 in stock (B2072)