Used Tanks & Kettles in Ontario, Canada

SS Insualted Horizontal Tank

-Aprox. 500 Gallons -SS hinge lids -Internal tank dims: aprox. 76" long x 42" wide x 20" deep -With frontal slope (bottom of tank) -2" outlet -Inlets on top of tank: one 3", one 1" -Tri clamp connections -Four 7....

Poly Tank on Steel Base

• Manufacturer: Poly Gator

-Capacity: -844.44 Imperial gallons -1,013 U.S. Gallons -3,834 Liters -Manufacturer: Poly Gator -Liquid holding tank -Cone bottom -Inlet & outlet: 2.5" -Manhole on top -Tank dimensions: -Height straight side: 32....

Stainless Steel Horizontal Tank

-Shipping dimensions: Length 138” x Width 80” x Height 105” -Horizontal tank -Stainless steel -Food grade -6 Stationary legs: 29 1/4” height -Man hole on side -2 tank cleaners -Insulated -1420 Imperial gallons -H...

Open Top Steel Tank

-Open top -Flat bottom -Tank dimensions: Height 60"/ 5ft x Diameter 43" x outlet 2" -Height from outlet to the ground: 8.5" -Total height: 78"

Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

Viatec Resin-fab Tank

-2798 IMP gallon -Design temp and press 160 F -Structural layer: 745-4615 Isophthalic

Open top plastic tank

-Nipple on bottom is 1/2" -Open top -Nipple on side is .5" -31" diameter -43.5 height -125 imp gall

Double walled plastic tank

-Double walled -Flat bottom -Plastic -Closed top -2,504 IMP

SS Horizontal rectangular tank

-Inside tub dimensions: Length 52” x Width:20” x Height:19” at one end and 16” on the other -Shipping dimensions: Length:54” x Width:23” x Height:25” -Stainless steel tub with corrugated bottom at one end for drain.

Stainless-steel Holding Tank

-Diameter: 40" -Height: 40" -2" fill and discharge ports -Distance from the ground to the bottom outlet: 13.5" -22" top hatch -Cone bottom -Flange connections -Total dimensions: Height: 69" -Width: 40" -Approxima...

Open top tank on wheels

176 IMP -on 4 wheels - open top - flat bottom -304 stainless steel

Stainless Steel Storage Tank

-Inlets: One 1.5", one 1" -Outlet: 1.5" -Has heating coil -Height: 37" -Diameter: 35" -Domed bottom -Distance from the ground to the bottom outlet: 2.5" -Total dimensions: -Height: 52" -Width: 36.5" -Approximate ...

Mixer on a stainless steel tank

• Manufacturer: Marks

-Nord Motor: 230/460v, 3 phase, 0.5 HP -Shaft is .625” diameter by 28-3/4” long -Variable frequency Drive: 500-600 V, 1HP model number ODP-2-26010-3H04A-MN -1-1/2” inlet -1-1/2” outlet -Shipping: 34” x 34” x 71.5...