Used Processing in Wallonia, Belgium

Steep belt conveyor, band width 500mm

Band width 500 mm, Axdistance 10000 mm Drummotor NERTON, type LS90L2, 1,5 KW, 144 rpm Closed steelconstruction, distance between carrier roller 800mm

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Tansport chut LOCKER 4000 x 800 /440mm

Type: LDDC, serial number: DDC0493 Year of construction: 1999, weight : 1000 kg 2 Vibrating motors INVICTA, Type BK40-2716, 1,3 Kw, 960 rpm, 415 V Height of the input 200mm, the entrance is from behind Height of...

Bunker with discharging conveyor ± 4,4 m³

Gear motor + brake SEW, type KA87TDVI32S4BMO/HF, 5,5 kW, 230/400 V, 1430 rpm, exit: 46 rpm 2 drums Ø 320mm Bunker equipped with PVC in the inside Rollings with rubber Bunker with frame and discharging conveyor Wi...

1995 Pneumatic dust conveyor BOGGI+LEGNANI 50 l

• Manufacturer: Legnani

Serial number: 74057, construction year: 1995, weight: ± 100 kg Ø 470mm Operating pressure 8 bar With one pneumatic clap Input sand Ø 150mm Temperature 200°C Capacity 50 l Is adapted to silo S3104 of 19m³ Appropr...

Discharging belt EA 4500 mm x 990 mm

Gear motor BAUER, D2A47H/309K, serial number F11478; 4 kW, 5,5 hp; 220/380 V, 1420/31,5 rpm Driven by chain, Ø rolls 130 mm With cable for stopping the sides

Vibrating convayor AEG 7600 x 630 mm, 60 t/h

Type: OA7585/630063, serial number: B40089 With 2 vibrating motors AEG type 063 X-K, 5,13 KW, 1460 rpm, serial number 3054003-3054004, stroke 4,5 mm With cover to pose on the 4 rubber elements With round antiwear...

1991 Vibrating chut KSK- F, 2800 mm x 850 mm

Type: F, serial number: 91023 2 motors FRIEDRICH, type R 700-6, serial number 8209.219, 3 kW, 220/380 V, 50 Hz, 12,6/7,3 A, 980 rpm With cover

Shake-out conveyer 1700 x 670 mm

Motor HEMAF, 4 hp, 380/660 V, 2820 rpm Stich 125 x 65 mm, on 4 springs In good condition

1962 Double grinder, foundry, Ø 600 mm, continuous

• Manufacturer: BAUTENBERG

Type: SS6/45/25, serial number: 1653 Motor HELIN, type DKH 15- 4; 2 x 5,5 kW; 1430 rpm; 380/660 V Continuous speed with 2 motors and 4-step pulley

Core mixer VOGEL&SCHEMMANN, Mischka 3GF, max. 400 kg

• Manufacturer: Vogel

Mixer with oilbath gearbox, charges 250 to 400 kg, output (manual filling) ±4000kg/h; (automatic filling) ±4800kg/h

Fixed bronze melting furnace, ± 400 kg, oil heated

• Manufacturer: MORGAN FURNACE

Inside length 600 mm, Ø 450 mm For crucible AX 350

Sandbunker with disloading conveyor 6 m³

Drive over chain; height at the sand arriving ± 2400 mm

Screw conveyor 4300 mm, Ø 320 mm

Gear motor SEW, type 72VD90L-4; serial number 1706628; 1,5 kW; 220 V; 1400 rpm With cover and 3 inlets With coupling

Propane tank 20.000l, REGO-ROTOGAGE

• Manufacturer: Rego

Type: V32298/71, Serial number: 24975 Year of construction: 1972, Weight: ± 4700 KG 2 steels colums 1700mm x 550mm width Rectangular platform as well as safety railing 4700mm x 1600mm, h. 1100mm 3 gas inlets Ø 90...