Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Texas

Building Filters

709

Used Shell And Tube Heat Exchangers in Texas, USA

  • AIR FIN COOLERS 99556

    AIR FIN COOLERS 99556

    • Manufacturer: Smithco

    MFG. BY SMITHCO IN 1993; Qty: 1 | Alloy: C | Extended sq.ft.: 50230 | Bare sq.ft.: 2373 | Psi: 150 | Full vacuum y/n: N | Temp. deg. f: 300 | Tube material: CS | Total tubes: 283 | Tube length (ft'in"): 32'0" | T...

    Cleveland, TX
  • MOTION INDUSTRIES CENTRIFUGE PUMP HYD

    MOTION INDUSTRIES CENTRIFUGE PUMP HYD UNIT

    • Manufacturer: MOTION INDUSTRIES

    CENTRIFUGE PUMP HYDROLIC UNIT; MOTION INDUSTRIES, INC.; S/N MS45 31265; PSI 1500; HP 25; GPM 23; RES. CAP. 150 GAL.; 230/460 VOLT; HEAT EXCHANGER BY AMERICAN INDUSTRIES HEAT TRANSN INC.; SHELL 250 PSI; TUBES 150 ...

    Houston, TX
  • MOTION INDUSTRIES, HYDRAULIC UNIT

    MOTION INDUSTRIES, HYDRAULIC UNIT

    • Manufacturer: MOTION INDUSTRIES,

    MOTION INDUSTRIES, INC.; HYDRAULIC UNIT; S/N MS45 11065; HP 25; GPM 22; RES CAP 150 GAL; HEAT EXCHANGER AMERICAN INDUSTRIAL HEAT TRANS, INC.; MODEL AB-1004-C6-TP; SHELL 250 PSI; TUBE 150 PSI; TEMP 350 F; S/N 1728...

    Houston, TX
  • PACKED COLUMN

    PACKED COLUMN

    • Manufacturer: Gaspar Inc

    GASPAR INC 1990, S/N 691011, N.B. #254. COLUMN WRAPPED WITH STEAM TUBING. CODE PAPERS ON FILE.

    Houston, TX
  • AERIAL COOLER

    AERIAL COOLER

    • Manufacturer: FIN-X, INC.

    ONE (1) SURPLUS AERIAL COOLER; 408 SQ. FT; 8579 EXT; CARBON STEEL TUBES; MFG: FIN-X, INC.; YR: 2009; SN: B568.1; NB: 3872; 100 PSI @ 350F TUBES; 4 ROW; 4 PASS; 130 TUBES X 12' LENGTH. DIMENSION: 7.75" X...

    Houston, TX
  • COLUMN(PACKED)

    COLUMN(PACKED)

    • Manufacturer: Futura

    MFG BY FUTURA IN 1983 S/N 19249, 6 BOLTED SECTIONS, LUG SUPPORTED14" X 53'7.25"

    Houston, TX
  • Beloit Headbox

    Beloit Headbox

    • Manufacturer: Beloit

    Beloit Headbox; Width 180 in; FPM 1800; Material SS; PaperType Fine; Micro Adust for Fine Paper, Air Pad Box, Unit has Two Rectifier Rolls 16" and 12" Diameter, 2 Roll Taper Header, Tube Bundles, Air Padded B...

    Cypress, TX
  • AERIAL COOLER

    AERIAL COOLER

    • Manufacturer: FIN-X, INC.

    ONE (1) SURPLUS AERIAL COOLER; 408 SQ. FT; 8579 EXT; CARBON STEEL TUBES; MFG: FIN-X, INC.; YR: 2009; SN: B570.1; NB: 3874; 100 PSI @ 350F TUBES; 4 ROW; 4 PASS; 130 TUBES X 12' LENGTH. DIMENSION: 7.75" X...

    Houston, TX
  • REGEN GAS COOLER

    REGEN GAS COOLER

    • Manufacturer: Rainey Corporation

    ONE (1) SURPLUS REGEN GAS COOLER; 186 SQ. FT; 1650 PSI @ 500F; MFG: RAINEY CORPORATION; NB: 1987; SN: R-1795-1-A; YEAR: 1992; TUBES: 89 X 1" X 8'-0"; HEADER NOZZLE SIZES: (4) 3".

    Houston, TX
  • Trusted Seller
    HYDAC EKS-510-0 RFMBN3HC165G10F1.0/12T LARGE HYDRAULIC

    HYDAC EKS-510-0 RFMBN3HC165G10F1.0/12T LARGE HYDRAULIC FILTER W HEAT EXCHANGER T186783

    • Manufacturer: Hydac

    Extra Information Brand: HYDAC MPN: EKS-510-0 Alternative Part Number: RFMBN3HC165G10F1.0/12T Shipping Weight: 180 LBS Shipping Dimensions: 25 (in) × 24 (in) ...

    $1,500 USD
    El Paso, TX
  • LINDBERG-MPH | IMMERSION TUBE |

    LINDBERG-MPH | IMMERSION TUBE | ZINC MELTING FURNACE | MODEL 63-ITMS

    • Manufacturer: Lindberg

    Technical Data Sheet: - Brand: LINDBERG-MPH - Model: 63-ITMS - Serial Number: I-8098 - BTU Input: 1,665,000 - Maximum Temperature: 850°F (454°C) - Melt Rate: 500 kg/hr (1102 lb/hr) - Bath Capacity: 1080 kg (2380...

    $77,000 USD

    Get financing

    Est. $1,449/mo

    Laredo, TX
  • no-image_en.png

    M-0463 Heat Exchanger Tubes

      PSI 0 Length 3/4" Tubes Description Heat Exchanger Tubes

      Wichita Falls, TX
    • no-image_en.png

      M-0771 Heat Exchanger tubes

        PSI 0 Length 1" x .109" Description Heat Exchanger tubes

        Wichita Falls, TX
      • no-image_en.png

        M-0464 Heat Exchanger Tubes Stainless

          PSI 0 Length 1" Tubes Description Heat Exchanger Tubes Stainless

          Wichita Falls, TX
        • no-image_en.png

          M-0600 Heat Exchanger, High Pressure

            PSI 0 Length U Tube Description Heat Exchanger, High Pressure

            Wichita Falls, TX
          4445464748

          Overview

          Shell and tube heat exchangers are heavy-duty industrial devices that transfer heat between fluids using a bundle of tubes inside a pressure shell. They handle high temperatures and pressures, offer many material and design options, and are common in petrochemical, power, HVAC, and process industries. Used units are attractive because tubes can be replaced, but require careful inspection for corrosion, tube wear, leaks, and code compliance before purchase.

          FAQ

          What should I check when buying a used shell and tube heat exchanger?

          Check design specs (flow rates, pressure, temperature), materials of construction, ASME or PED stamping, service history, tubing condition (wall thickness, corrosion, pitting), tube-sheet condition, end covers, and past repairs or thermal damage.

          How do I prepare a shell and tube exchanger for shipping?

          Fully drain and flush fluids, isolate and tag connected piping, remove fragile internals if recommended, coat exposed metal with preservative, secure tube bundle, protect nozzle faces and lifting points, and arrange appropriate heavy-haul transport and crane services.

          What maintenance is needed after purchase to ensure reliable operation?

          Start with a detailed inspection and pressure/hydrostatic test. Implement a cleaning plan (chemical or mechanical descaling), inspect and test tubes for leaks, replace gaskets, monitor for fouling and corrosion, and follow periodic inspections based on service severity.