Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Texas

Building Filters

709

Used Shell And Tube Heat Exchangers in Texas, USA

  • EXCHANGERS 105821

    EXCHANGERS 105821

    • Manufacturer: DAEKYUNG

    UNUSED SHELL AND TUBE HEAT EXCHANGER; MFG. BY DAEKYUNG IN 2008;

    Cleveland, TX
  • EXCHANGERS 112335

    EXCHANGERS 112335

      Used 437 Sq. Ft. Horizontal Utube Heat Exchanger. Mfg. by Fabsco Shell and Tube LLC in 2012. All 304L Stainless Steel. 18"/24" diameter x 16'0" F/F. Previous Service: AGR Rich Flash Gas Cooler.

      Cleveland, TX
    • EXCHANGERS 112292

      EXCHANGERS 112292

        Used 437 Sq. Ft. Horizontal Utube Heat Exchanger. Mfg. by Fabsco Shell and Tube LLC in 2012. All 304L Stainless Steel. 18"/24" diameter x 16'0" F/F. Previous Service: AGR Rich Flash Gas Cooler.

        Cleveland, TX
      • EXCHANGERS 114734

        EXCHANGERS 114734

          Unused 915 sq. ft. horizontal heat exchanger. 3.542 Design duty (MMBTU/Hr). Mfg. by Wuxi Chemical Equipment (China) in 2023. . Shell Design Rating: 135/FV psig @ 320 deg. F. Tube Design Rating: 175/FV psig @ 300...

          Cleveland, TX
        • EXCHANGERS 113511

          EXCHANGERS 113511

            Used 2633 Sq. Ft. Vertical Heat Exchanger. Mfg. by Southern Heat Exchanger in 1989. 32" diameter x 20'0" F/F. Shell: Carbon Steel, 75FV psi @ 300 deg. F. Tubes: 316L Stainless Steel, (503) 1" O.D. x 16 BWG, 75FV ...

            Cleveland, TX
          • EXCHANGERS 113515

            EXCHANGERS 113515

              Used 930 Sq. Ft. Vertical Heat Exchanger. Mfg. by Southern Heat Exchanger in 1989. 18" diameter x 20'0" F/F. Shell: Carbon Steel, 75FV psi @ 250 deg. F. Tubes: 316L Stainless Steel, (237) .75" O.D. x 16 BWG, 75FV...

              Cleveland, TX
            • EXCHANGERS 113512

              EXCHANGERS 113512

                Used 706 Sq. Ft. Vertical Heat Exchanger. Mfg. by Southern Heat Exchanger in 1989. 38" diameter x 6'0" F/F. Shell: Carbon Steel, 75FV psi @ 300 deg. F. Tubes: 316L Stainless Steel, (300) 1.5" O.D. x 16 BWG, 75FV ...

                Cleveland, TX
              • EXCHANGERS 114980

                EXCHANGERS 114980

                  Used 94 Sq Ft 304L stainless Steel Shell and Tube heat exchanger. Mft. by Taylor Tank Co. Inc. in 2013. (40) .75" 304L SS Tubes MAWP 150 PSI @ 200 deg. F. Carbon Steel shell MAWP 150 PSIG @ 200 deg. F.

                  Cleveland, TX
                • EXCHANGERS 113516

                  EXCHANGERS 113516

                    Used 733 Sq. Ft. Vertical Heat Exchanger. Mfg. by Southern Heat Exchanger in 1989. 24" diameter x 10'0" F/F. Shell: Carbon Steel, 75FV psi @ 300 deg. F. Tubes: 316L Stainless Steel, (280) 1" O.D. x 16 BWG, 75FV @...

                    Cleveland, TX
                  • EXCHANGERS 113473

                    EXCHANGERS 113473

                      Used estimated 300 sq. ft. Vertical 304L Stainless Steel Heat Exchanger. Mfg. by Southern Heat Exchanger in 1990. (96) 3/4" O.D. x 16 BWG Tubes. Shell Rated 150 psi @ -13 to 302 deg. F. Tubes Rated 150 psi @ -13 ...

                      Cleveland, TX
                    • EXCHANGERS 114979

                      EXCHANGERS 114979

                        Used 416 Sq Ft 316L Stainless Steel Vertical Shell and Tube Heat Exchanger. Mfg. by Taylor Tank in 2016. Shell Rated 150 PSI @ 300 deg. F. (212) .75" OD Tubes rated 150 PSI/FV @ 300 deg. F. 16" OD x 156.25" OAL.

                        Cleveland, TX
                      • EXCHANGERS 113157

                        EXCHANGERS 113157

                          Used approximately 150 sq. ft. Southern heat exchanger. Approximately 12" diameter X 6' long shell. 3/4" stainless steel tubes. Shell side 50 FV @ 250 degrees F. Tube side 50 psi @ 250 degrees F. Horizontal...

                          Cleveland, TX
                        • EXCHANGERS 114492

                          EXCHANGERS 114492

                            Used 50 sq. ft. exchanger. Mfg. by Alabama Heat Exchanger in 2007. Carbon steel shell, 100FV @ 400 deg. F. (24) 3/4" OD tubes, 316L stainless steel, 100FV @ 400 deg. F. 6" diameter x 10'0" tube length.

                            Cleveland, TX
                          • EXCHANGERS 114486

                            EXCHANGERS 114486

                              Used 50 sq. ft. exchanger. Mfg. by Alabama Heat Exchanger in 2007. Carbon steel shell, 100FV @ 400 deg. F. (24) 3/4" OD tubes, 316L stainless steel, 100FV @ 400 deg. F. 6" diameter x 10'0" tube length.

                              Cleveland, TX
                            • EXCHANGERS 112783

                              EXCHANGERS 112783

                                Previous Service: Feed gas saturator, Used 3074 sq. ft. heat exchanger. Manufactured by Cust-O-Fab in 1994.

                                Cleveland, TX
                              1011121314

                              Overview

                              Shell and tube heat exchangers are heavy-duty industrial devices that transfer heat between fluids using a bundle of tubes inside a pressure shell. They handle high temperatures and pressures, offer many material and design options, and are common in petrochemical, power, HVAC, and process industries. Used units are attractive because tubes can be replaced, but require careful inspection for corrosion, tube wear, leaks, and code compliance before purchase.

                              FAQ

                              What should I check when buying a used shell and tube heat exchanger?

                              Check design specs (flow rates, pressure, temperature), materials of construction, ASME or PED stamping, service history, tubing condition (wall thickness, corrosion, pitting), tube-sheet condition, end covers, and past repairs or thermal damage.

                              How do I prepare a shell and tube exchanger for shipping?

                              Fully drain and flush fluids, isolate and tag connected piping, remove fragile internals if recommended, coat exposed metal with preservative, secure tube bundle, protect nozzle faces and lifting points, and arrange appropriate heavy-haul transport and crane services.

                              What maintenance is needed after purchase to ensure reliable operation?

                              Start with a detailed inspection and pressure/hydrostatic test. Implement a cleaning plan (chemical or mechanical descaling), inspect and test tubes for leaks, replace gaskets, monitor for fouling and corrosion, and follow periodic inspections based on service severity.