Building Filters
Cyto centrifuge made in 1993
- Manufacturer: サイトウ遠心機
200V No operation panel Where to use: Chemical factory Food factory Feed and fertilizer factory Water treatment plant | Processing power: 3m3 / h | Rotation speed: 7300rpm | Power: 5.5kw | Material: Wetted parts ...
Kure, Japan
Mitsubishi Kakoki SJ6000
- Manufacturer: Mitsubishi
- Model: SJ 6000
11kw Purifier (for oil) 5500rpm Processing capacity: approx. 6000 L / hour
Hiroshima, Japan
Kotobuki Industry S3-0
- Manufacturer: Kotobuki Industry
22kw (explosion-proof motor) 1300～2200rpm 1300G 【Maintained Processing capacity: 5-10m3/H Serviced in 2014 -> In indoor storage Overlay thermal spraying is not performed. Please consult with us.
Hiroshima, Japan
Saito centrifuge machine ADS10000P
- Manufacturer: Saito centrifuge
25kw Purifier (for oil) 5000rpm Processing capacity: 10t/h
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
22kw 4000rpm/3200G Processing capacity: 3-5m3/H Power: 22kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
2009 Alfa Laval AFPX610XGD-74CG
- Manufacturer: Alfa-Laval
- Model: AFPX
Power: 18.5kw/200V | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
2016 IHI HS-255L
- Manufacturer: IHI
- Model: HS
4000 rpm/3500 G Nominal capacity: 2.5–3.5 t/h Backdrive specification (can be modified to single-motor specification) Control panel included
Hiroshima, Japan
2002 Alfa Laval LAPX404SGP-31-50/60
- Manufacturer: Alfa-Laval
- Model: LAPX
Clarifier Bowl rotation speed: 9512 rpm Centrifugal force: 11100G (at bowl inner circumference) Bowl volume: 2.2L Solid space: 1.1L Maximum water flow rate: approx. 1 m3/h (varies depending on the properties of t...
Hiroshima, Japan
1999 Mitsubishi Kakoki SJ-50F
- Manufacturer: Mitsubishi
6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: Tomoe kogyo
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan
1973 Tomoe Kogyo P-3400
- Manufacturer: Tomoe kogyo
30kW 4000rpm/3200G Gear ratio: 1/165 Spare rotor included (gear ratio: 1/52) Click here for a video of the test run (YouTube) after maintenance was completed.
Hiroshima, Japan
1989 Matsumoto Machinery Works MARK III 48 × 30
- Manufacturer: Matsumoto Machinery Works
Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G
Hiroshima, Japan
Tanabe Willtech Z-2L (overflow type)
- Manufacturer: Tanabe Willtech
Main: 3600rpm/3000rpm BD: 3030rpm/2530rpm Differential speed: 10rpm/8.2rpm With spare screw Applications: Suitable for sludge dewatering.
Hiroshima, Japan
Hiroshima, Japan
2006 Kotobuki SC-170
- Manufacturer: Kotobuki
Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...
Hiroshima, Japan
