Processing » Extruders » Single Screw Extruders » Ohio

Building Filters

20

Used Single Screw Extruders in Ohio, USA

  • Trusted Seller
    Bonnot Single Screw Extruder

    Bonnot Single Screw Extruder

    • Manufacturer: Bonnot

    Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...

    Cleveland, OH
  • Trusted Seller
    0.375" Randcastle Microtruder Extruder, Model

    0.375" Randcastle Microtruder Extruder, Model RCP-0375

    • Manufacturer: Randcastle

    0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...

    Cleveland, OH
  • Trusted Seller
    0.375" Randcastle Microtruder Extruder, Model

    0.375" Randcastle Microtruder Extruder, Model RCP-0375

    • Manufacturer: Randcastle

    0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

    Cleveland, OH
  • Trusted Seller
    4.5" NRM Extruder, 20:1 L/D,

    4.5" NRM Extruder, 20:1 L/D, 150 HP

    • Manufacturer: NRM

    4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.

    Cleveland, OH
  • Trusted Seller
    2.5" Davis Standard Extruder, 24:1,

    2.5" Davis Standard Extruder, 24:1, 50 HP

    • Manufacturer: Davis-Standard

    2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...

    Cleveland, OH
  • Trusted Seller
    1.25" Killion Extruder, 24:1 L/D,

    1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath

    • Manufacturer: Killion

    1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with co...

    Cleveland, OH
  • Trusted Seller
    0.75" Brabender Extruder, 25:1 L/D,

    0.75" Brabender Extruder, 25:1 L/D, Model 2503

    • Manufacturer: Brabender
    • Model: 2503

    0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.

    Cleveland, OH
  • Trusted Seller
    4.5" Davis Standard Extruder, 30:1

    4.5" Davis Standard Extruder, 30:1 L/D, 150 HP

    • Manufacturer: Davis-Standard

    4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...

    Cleveland, OH
  • Trusted Seller
    6" Davis Standard Egan Extruder,

    6" Davis Standard Egan Extruder, 44:1 L/D, 400 HP

    • Manufacturer: Davis-Standard

    6" Davis Standard Egan Extruder, 44:1 L/D, 400 HP Used 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump,...

    Cleveland, OH
  • Trusted Seller
    Davis Standard 6" Single Screw

    Davis Standard 6" Single Screw Extruder System

    • Manufacturer: Davis-Standard

    The Davis Standard 6" Single Screw Extruder System is a robust piece of used recycling equipment, ideal for processing tasks. It operates with a powerful 400 HP DC motor and drive, facilitating efficient performa...

    $136,275 USD

    Get financing

    Est. $2,565/mo

    Ohio, USA
  • Trusted Seller
    10" Intercole Stewart Bolling Single

    10" Intercole Stewart Bolling Single Screw Extruder, 10:1 l/d, 300 HP

    • Manufacturer: Stewart Bolling

    10" Intercole Stewart Bolling Single Screw Extruder, 10:1 l/d, 300 HP Used 10" Intercole Stewart� Bolling single screw extruder, 10:1 l/d, electrically heated, air cooled barrel, jacketed feed section with hydra...

    Cleveland, OH
  • 2015 Crown 2.5" Single Screw

    2015 Crown 2.5" Single Screw Extruder

    • Manufacturer: Crown

    – 40″ Barrel Center Line – 10 – 200 Kgs/hr – Oversized HP Rating – Designed for 10,000 PSI Max Pressure – Closed Loop Cooling System

    Valley City, OH
  • Trusted Seller
    1999 BUSS MDS200-4 #0363624

    1999 BUSS MDS200-4 #0363624

    • Manufacturer: Buss
    • Model: MDS200-4

    8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm Includes: Buss Hot Cut Pelletizer Model PVW200 with oil heated/cooled die p...

    Toledo, OH
  • Trusted Seller
    40 MM Cissco Machinery Strand

    40 MM Cissco Machinery Strand Extrusion Line

    • Manufacturer: Cissco Machinery Co.

    40 MM Cissco Machinery Strand Extrusion Line Used 40 MM Cissco Machinery Co strand extrusion with 40 MM Cissco Machinery single screw extruder, model ABS 40/28, 28:1 L/D, air cooled barrel, jacketed feed section,...

    Cleveland, OH
  • Trusted Seller
    10" Stewart Bolling / Beringer

    10" Stewart Bolling / Beringer Water Ring Pelletizing Line

    • Manufacturer: Stewart Bolling

    10" Stewart Bolling / Beringer Water Ring Pelletizing Line Used 10" Intercole Stewart Bolling / Beringer water ring pelletizing line consisting of: 10" Intercole Stuart Bolling single screw extruder, 10:1 l/d, el...

    Cleveland, OH
12

Overview

Single screw extruders are industrial machines used to process and shape plastic materials by forcing them through a shaped die. They are widely used in the plastic manufacturing industry for producing pipes, sheets, films, and other plastic products. These machines are known for their efficiency and ability to handle a variety of plastic types.

FAQ

What should I consider when buying a used single screw extruder?

Consider the machine's age, condition, screw diameter, and length-to-diameter ratio. Check for maintenance records and ensure the extruder has been well-maintained and properly serviced.

How do I ensure the single screw extruder is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Ensure the extruder is properly secured and protected during transit, and verify all necessary parts are included.

What is the maintenance schedule for a single screw extruder?

Regular maintenance includes checking and replacing worn screws and barrels, inspecting heating and cooling systems, and ensuring proper lubrication of moving parts. Consult the manufacturer’s manual for detailed maintenance intervals and procedures.