Used Processing in Flanders, Belgium

Trusted Seller
Netstal N235-90MP injection moulding
- Manufacturer: Netstal
klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap
Deinze, Belgium
Trusted Seller
Kaeser 10 bar compressor
- Manufacturer: Kaeser
Type: EPC510-250 Tank: 250 liter 10 bar 510 liter/min 3 kW 220/380 volt perfect
Deinze, Belgium
Trusted Seller
Analis Moffeloven / Muffle Furnace
- Manufacturer: Analis
Moffeloven, met hersluitbare klep Muffle furnace, with resealable lid Four à moufle, avec couvercle refermable ANALIS Namur BELGIUM OVEN Labo
Deinze, Belgium
Trusted Seller
Labor double walled storage tanks
- Manufacturer: Labor
3 tanks tank 1: 100 L without agitator, with pump 0.9 kw tank 2: 200 L, with agitator + pump 0.55 kw tank 3: 100L with agitator + pump 0.55 kw all double walled, for heating. + Heating unit ( for heating up water...
Deinze, Belgium
Trusted Seller
France Etuves 300° furnace (electric)
- Manufacturer: France Etuves
Type: XL6804VH Max 300° chamber inside height: 1700 mm chamber inside width: 2100 mm chamber inside depth: 1850 mm 49 kW - electric
Deinze, Belgium
Trusted Seller
Kaeser SX4 + dryer screwcompressor
- Manufacturer: Kaeser
SX4 details: 7,5 bar pressure = 450 liter/min Power: 3kW Fully automatic Super sound-proofed Vibration-damped Sigma control 2 Kaeser TA 5 refrigerated air dryer
Deinze, Belgium
Trusted Seller
Heavy Duty Roller Conveyors 3100 mm
- Manufacturer: Heavy Duty Roller Conveyors
Heavy duty roller conveyors, originating from a large Lisse straightening machine consists of: - 2 yellow conveyors which were used in combination with cross feeds - 3 classic green conveyors - magnetic lifting...
Deinze, Belgium
Trusted Seller
Ingersoll Rand 7,5 kW
- Manufacturer: Ingersoll Rand
- Model: 75 KW
type MH7.5 10 bar 7,5 kW 400 V Weight: 227 kg
Deinze, Belgium
Trusted Seller
Cast iron surface plates
- Manufacturer: Cast iron surface plates
Cast iron surface plates
Deinze, Belgium
Trusted Seller
Lindley Thompson Transfo 400-200V
- Manufacturer: Lindley Thompson Transfo
kVa: 200 Volts high: 415 Volts low: 191 Amp high: 279 Amp low: 605 50Hz Diagram of connections No: 9054
Deinze, Belgium
Trusted Seller
Samafor Ø 50 mm
- Manufacturer: Samafor
Extrusion of plastic tubes Max Ø 50 mm Screw Ø 45 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here Y...
Deinze, Belgium
Trusted Seller
ATLAS COPCO E-AIRV1100
- Manufacturer: Atlas-Copco
Pressure [bar]: 14 | Tension [v/ph/hz]: 480/50-60 | Weight [kg]: 2750 | Power [kw]: 218 | Hours (on hour meter): 876 | Ce mark: ok | Length [m]: 3.47 | Width [m]: 1.22 | Height [m]: 1.8 | Location machine: Belgi...
Waregem, Belgium
Trusted Seller
2023 DOOSAN 7/25
- Manufacturer: Doosan
- Model: 725
Capacity [m³/min]: 2.5 | Pressure [bar]: 7 | Engine: Yanmar 3TNV80F-NXDDP | Weight [kg]: 750 | Power [kw]: 18.9 | Hours (on hour meter): 203 | Ce mark: ok | Length [m]: 1.86 | Width [m]: 1.05 | Height [m]: 1.03 ...
Waregem, Belgium
Trusted Seller
2023 DOOSAN 7/25
- Manufacturer: Doosan
- Model: 725
Capacity [m³/min]: 2.5 | Pressure [bar]: 7 | Engine: Yanmar 3TNV80F-NXDDP | Weight [kg]: 750 | Power [kw]: 18.9 | Hours (on hour meter): 25 | Ce mark: ok | Length [m]: 1.86 | Width [m]: 1.05 | Height [m]: 1.03 |...
Waregem, Belgium
Trusted Seller
2019 ATLAS COPCO Y1260CD-N
- Manufacturer: Atlas-Copco
Capacity [m³/min]: 34.8 | Pressure [bar]: 35 | Engine: Caterpillar C 18 | Weight [kg]: 7670 | Power [kw]: 429 | Hours (on hour meter): 5247 | Ce mark: No | Length [m]: 5.10 | Width [m]: 2.25 | Height [m]: 2.64 |...
Waregem, Belgium