Used working in Japan

Oshima Iron Works BM-400
- Manufacturer: Oshima
Material: SS Capacity: 450L Lining: Alumina ceramic With ball
Hiroshima, Japan
Oshima Iron Works BM-440
- Manufacturer: Oshima
Motor 3.7kw Capacity: 450L Material: SS, Inner lining: alumina ceramic No ball
Hiroshima, Japan
Oshima Iron Works BM-400
- Manufacturer: Oshima
Material: SS, Capacity: 460L Interior lining: alumina ceramic No ball
Hiroshima, Japan
Nishihara Works HW-3A
- Manufacturer: 西原製作所
積載重量：100Kg/カゴ蒸気量：蒸気圧力5Kg/㎠蒸発量：150Kg/H 【メーカーホームページURL】
Hiroshima, Japan
Shimazaki Works Cylindrical Vertical
- Manufacturer: 島崎製作所
For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process
Hiroshima, Japan
Shimazaki Works RF 04
- Manufacturer: 島崎製作所
0.4kw (cyclo), 25rpm (60Hz), anchor blade Shaft: Φ40 x 1988H Reduction ratio 1/71
Hiroshima, Japan
Trusted Seller
2015 Takizawa Iron Works TCN-3500 L10
- Manufacturer: Takizawa Iron Works
Machine specifications ○ NC system FANUC-32iB ○ Main spindle Chuck 10 inch three-jaw Kitagawa B-210 Spindle speed 2500 rpm Motor 15/11 kW 30 min / continuous ○ Capacity Vibration on bed φ490 mm Maximum workpiece ...
Tokyo, Japan
Trusted Seller
2008 Takizawa Iron Works TAL600x3000
- Manufacturer: Takizawa Iron Works
Machine Specifications ○Spindle Chuck: 12-inch, 3-jaw scroll ○Swing/Capacity Bed Swing: φ600mm Cross Feed Swing: φ380mm ○Bed Dimensions Center Distance: 3000mm Bed Length: 4370mm Bed Width: 430mm ○Spindle Spindle...
Tokyo, Japan
Araki Iron Works SRG-490
- Manufacturer: 荒木鉄工
Motor: Dispersion 22Kw 4P200V (Explosion-proof) Agitation 7.5Kw Hydraulic 1.5Kw With hand control panel Remarks With inverter (2 pcs.)
Hiroshima, Japan
2012 Ogawara Works HDS-100
- Manufacturer: 大川原製作所
Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...
Hiroshima, Japan
［Kameshima Iron Works] Pump No model
- Manufacturer: 亀嶋鐵工所
Motor: 0.75kw Gear pump Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
Nakanishi Iron Works NC-30
- Manufacturer: 中西鉄工
Remarks. Older age, but clean. Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: １ | Size: Container dimensions: φ900 x 800 Aperture: φ580 with lid
Hiroshima, Japan
Shikuguchi Iron Works Cylinder Vertical
- Manufacturer: 炬口鉄工
With stirrer Jacket not available Power: 1.5kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
Okuma Iron Works LS
- Manufacturer: Okuma
- Model: LS
450φ4 jaw single action chuck Spindle speed 19-1000rpm 800 between centers Swing on bed 540 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
Okuma Iron Works LS
- Manufacturer: Okuma
- Model: LS
8-inch 3-jaw Scroll chuck Spindle through-hole diameter 52 Spindle speed 35-1800 rpm Center-to-center 800 Swing on bed 540 Reciprocation If there is any discrepancy between the contents and the actual product, th...
Tatebayashi, Japan