Used variable speed in Venice, Metropolitan City of Venice, Italy

2005 Griggio Psa520/r Thickness planers

• Manufacturer: Griggio

Thickness planer GRIGGIO model PSA520/R sharpening shaft with sharp knives motor kw 4 / hp 5.5, volt 380 usable working height from 3 to 300 mm motorized raising of the table mechanical numeric reader of the meas...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS MOD. TS400

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS MOD. TS400 Double speed device: thanks to a reading sensor the machine starts cutting at a reduced speed to accelerate after the blade enters the plank, this lea...

DICO - Capping Machine - SINGLE HEAD

• Manufacturer: DICO

DICO SINGLE HEAD SCREW CAPPER Currently set up for 28mm caps and 84mm diameter bottles. Cleaned, checked, tested and working - Integrated sorter bowl - Fully interlocked guarding - 1.8m variable speed through c...

2000 BACCI TWIN MX 6CN MACHINING CENTER - CE COMPLIANT

• Manufacturer: Bacci
• Model: MX

WORKING CENTER BACCI TWIN - TO CE STANDARDS - USED COMPLETE WITH: Working range X 3400 mm Working range Y 1800 mm Working range Z 1250 mm B unlimited C 400° Head type 4 (Kw 7.5 each) Speed of rotation max 24,000 ...

KOSAN - Depulverizer - LUMINER II

• Manufacturer: KOSAN

KOSAN DEPULVERIZER, MODEL LUMINER II Stainless steel capsule and tablet polisher for pharmaceuticals. - stainless steel construction - new polishing brushes - as-new condition MOTOR - 3 phase, 10 amp - 60 cyc...

Used Capping Machine AROL Kamma TS 4 Heads for T cap 4000 Bph

• Manufacturer: Arol
• Model: Kamma

Details No. of heads: 4 Cap type: T stopper Rotation direction: Counterclockwise Current state: Ready for operation Safety features: Yes Electrical data: V: 380 • kW: 2.5 • Hz: 50 Used Capping Machine AROL Kamma...

SCM GROUP PROFISET 40/60

• Manufacturer: SCM / SCMI

SCM PROFISET PLANING MACHINE SCM GROUP Automatic planer / moulder up to 6 shafts, available in four compositions with the possibility of preparation for profiling on the upper horizontal shaft (optional) Profiset...

Capper Stelvin Bertolaso Sigma 603

• Manufacturer: Bertolaso
• Model: Sigma

Used Bertolaso Sigma 603 Stelvin Capper, built in 1996, is a machine designed for bottling. This model, SIGMA 603, can reach an hourly output of 5,000 BPH, with a variable speed between 4,500 and 5,000 BPH. The m...

Viet Challenge 211b Calibrators

• Manufacturer: Viet
• Model: Challenge

VIET calibrating machine model CHALLENGE 211B 1100mm with 2 belts: – 1st belt as calibrating roller – 2nd belt as polishing roller – pneumatic on/off of the rollers, from control panel – cleaning blowers on both ...

LASM-VOLPATO LS

• Manufacturer: Volpato - Lasm
• Model: LS

VOLPATO EDGE SANDERS LS N1 / 4 - UP TO 6 OPTIONAL GROUPS LASM-VOLPATO The final result will depend on the type of composition requested by the customer according to his needs milling, sanding and satin finishing....

FRIULIAN VENTILATION FILTERING SUBSTATION - 15 KW

FRIULIAN VENTILATION FILTERING SUBSTATION - KW 15 - USED NO. 72 cotton canvas filter sleeves ** with dimensions: fi 200mm - h 2000 mm Maximum FILTERING capacity of the filter 13,000 m3/hour material galvanized sh...

2025 MGsrl 3000x50 mm plate roll

• Manufacturer: MGsrl

model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm CAPACITY plate width 3000 mm plate thickness 50 mm pre-bending 36 mm diameter rolling 2200 mm performance on plate quality 355 MPa -...