Used variable speed in Altopiano del Tesino, 38053 Castello Tesino TN, Italy

5 Axis bridge saw Gmm Egil 36

• Manufacturer: GMM
• Model: Egil 36

Used 5 axis bridge saw made in cast iron with: - Turnable and tilting hydraulic table - Power of the main motor 20 HP - Variable speed drive (inverter) - Tilting head (5 axis) from 0° to 90° - Complete with autom...

5 Axis Bridge Saw Gmm Litox

• Manufacturer: GMM
• Model: Litox

Used 5 axis bridge saw made in cast iron with: - Steel walls (no need to build concrete walls) - Power of the main motor 30 HP - Variable speed drive (inverter) - Tilting head (5 axis) from 0° to 90° - Complete w...

KAESER CSD 125 SFC COMPRESSOR

• Manufacturer: Kaeser
• Model: CSD 125

KAESER 10195 KAESER CSD 125 SFC COMPRESSOR With variable speed control (SFC) Max. pressure bar 8.5 Volumetric flow rate 2.84 to 12.00 m3/min Power 75 kw Compressed air connection G2 Sound pressure level 74 dB(A) ...

SCHULLER 800 TON TWO-UPRIGHT MECHANICAL PRESS Product code: 33477

• Capacity: 800 Tons at 12.5mm
• Stroke: 650 mm

Hurry! This product has already been viewed 228 times! Don't miss out! SCHULER 800 TON YEAR OF BUILD CAPACITY THRUST POINTS SLIDE STROKE VERTICAL LIGHT from the mold carriage, CBR SLIDE ADJUSTMENT SLIDE DIMENSION...

1981 Weinig U17n Moulders

• Manufacturer: Weinig
• Model: U17N

Moulder WEINIG model UNIMAT 17N with 8 spindles:-useful working sizes 170x120mm-cardan drive and pneumatic pressure-variable feeding speed-top feeding roller before the 1st spindle-tandem feeding groups on front ...

UNIVERSAL GRINDING G. RASTELLI R7A

• Manufacturer: Rastelli

CENTER HEIGHT 165 MM DISTANCE BETWEEN TIPS 1000 MM GRINDING WHEEL: DIAMETER 400 MM STRIP 50 MM FORO127 MM RPM 1400 RPM. MOVING WITH BATHING AUTO INCREMENT INCREASE PLONGÈ PLUMBING P. the HEAD PIECE 4 SPEED THE SP...

SAN ROCCO FUTURA 13 BORING MACHINE

• Manufacturer: San Rocco

SAN ROCCO 09190 MOD. FUTURA 13/32 MMT ECS 2301 numerical control COURSES: X-axis longitudinal stroke mm 3000 Y-axis vertical travel mm 2500 Z-axis transverse stroke mm 1500 MANDRIN: Diameter mm 130 Tool attachmen...

MILLING MACHINE ARNO F20

ARNO 06328 Useful surface area mm 1250x270 X axis stroke mm 900 X axis stroke mm 290 X axis stroke mm 400 T-slots No. 3 12 vel. Spindle taper ISO 40 Spindle speed No. 12 Spindle rpm 40:1725 Spindle sleeve diamete...

Mechanical Press Mecfond 1500T product code: 25594

• Manufacturer: Mecfond

Hurry! This product has already been viewed 3,579 times! Don't miss out! Mecfond 1500T Mechanical Press / H-frame Mechanical Press Mecfond 1500T Model / type S4-1500 Year of construction / 1984 Drive kinematics e...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS MOD. TS400

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS MOD. TS400 Double speed device: thanks to a reading sensor the machine starts cutting at a reduced speed to accelerate after the blade enters the plank, this lea...

2018 Introduttore Motorizzato Multi rip saws

• Manufacturer: Introduttore

Motorized feeder for double-shaft multi-blade saw:- length approximately 5.5 m, width of roller conveyors 550 mm- variable speed of rollers from control panel- 1 upper motorized wheel with pneumatic pressure- 2 i...

1985 Weinig U17a Moulders

• Manufacturer: Weinig
• Model: U 17A

Moulder WEINIG model UNIMAT 17A with 8 spindles:-useful working sizes 170x120mm-cardan drive and pneumatic pressure-variable feeding speed from 6,3 to 36,5 mt/min-double top feeding roller before the 1st spindle-...