Used variable speed in United Kingdom

NFM L65 IV Vertical cutter mixer

Ideal for medium-scale operations in both food and pharmaceutical manufacture, the L65IV will cut, mix and homogonise a variety of materials efficiently, reliably and fast. Variable speed controls allow for great...

Promarks TM500 Vacuum Tumbler

• Manufacturer: Promarks

The Promarks TM Series Vacuum Tumblers are constructed with heavy duty stainless steel, BUSCH vacuum pumps with liquid trap, variable speed, continuous vacuum, and reverse discharge function Due to the variable d...

13,500L S/S JKTD Contra Rotational mixing vessel 5.5 kW

Stainless Steel Jacketed with contra rotational Scraped surface mixers, chamber 2,900 mm dia x 2,000 mm deep with 800 deep cone to 50 mm dia outlet. Mounted on 4 stainless steel legs to give 200 mm ground clearan...

2014 Atlas Copco GA55VSD FF 13 BAR 371 CFM

• Manufacturer: Atlas-Copco
• Model: GA 55

Atlas Copco GA55 VSD FF55kw Variable Speed Drive with integral air dryer to remove all moisture from the air371CFM @ 7 Bar 322 CFM @ 10 Bar 271 CFM @ 13 BarCan go as low as 52 CFMTop quality ...

Rigal Bennett Saw Tooth Mixer 7.5 kW Flp

• Manufacturer: Rigal Bennett

New Dispersion Mixer with Variable Speed 630/2,880 Rpm Drive. 150mm Disc Mixing Head with Serated Edge Suitable for Mixing 3/600mm Dia & Depth. All Stainless Steel Contact Parts. Shafts Over 1,100mm Long Fitted w...

R-B New 30 Mm Dia S/S Screw Feeder

All Stainless Steel Contact Parts With Stainless Steel Hopper 460 mm X 300 mm X 300 mm Deep. 0.37 Kw Variable Speed Gear Drive. 700 mm Long Screw Mounted On Stainless Steel Bed Plate. Suitable For Bench Mounting

Driver Southall Vibro Feeder S/S

• Manufacturer: Driver Southall

S/S Vibro Feeder 600mm X 1830mm X 100mm Deep Trough With S/S Hopper. 7 Cu.M. Capacity 580mm X 1650mm X 770mm Tall. Mounted On Mild Steel Frame With Hydraulic Variable Speed Drive Control.

Rigal Bennett Saw Tooth Mixer 7.5 kW

• Manufacturer: Rigal Bennett

New Dispersion Mixer with Variable Speed 630/2880 Rpm Drive. 150mm Disc Mixing Head with Serated Edge Suitable for Mixing 3/600mm Dia & Depth. All Stainless Steel Contact Parts. Shafts Over 1,100mm Long Fitted wi...

2009 Atlas Copco GA90VSD

• Manufacturer: Atlas-Copco
• Model: GA 90

2009 90kW variable speed drive screw compressorPerfect working order machine came in with cooling fan failure which has now been replaced so despite a few hours is a proven reliable unitAdjustable pressure capabi...

EUROPA ASTRO V500 Vertical Bandsaw

• Manufacturer: Europa
• Motor: 2.2kW

EUROPA Astro V500 Vertical Bandsaw – contour sawing machines for metals. The V500 model has a 508mm throat and can clear 330mm under the guides. Variable blade speed from 15-1500 m/min allows cutting of metals ri...

A&N MGP5 Welding Positioners

• Manufacturer: A&N

Welding Positioner with power tilt and variable speed rotation and a 5000kg capacity Previously owned by the TWI so you can be assured of an excellent and well maintained machine Table Height 1200mm Table Diamete...

J. E. Taylor Jktd S/S Twin Screw Mixer

• Manufacturer: Taylor

Stainless Steel Twin Trough Mixer Blender 400 mm Wide, 2500 mm Long, 340 mm Deep Chamber Cap 220L. 1.1 kW Variable Speed Drive. End Outlet 270 mm X 150 mm with Slide Valve to Small Hopper.

Yps Shrink Wrap Tunnel Model 1810St

Entrance 460mm X 250mm Tall. Tunnel 1260mm Long. Overall Length Of Belt 2500mm With After-Cooler Fan. 3 Phase 10Kw 25 Amp Supply. Variable Speed Belt. Made By Yorkshire Packaging Supplies. Overall Size 1100mm X 2...