Used variable speed in Oregon, USA

urner 42" Twin Band Tilting Feedroll Resaw

One (1) Used Turner 42" Twin Band Tilting Feedroll Resaw. Two (2) 25HP, 220-440-volt motors. Variable-speed hydraulic feedroll drive. Feedrolls open 8"-wide and will handle 12" stock under saw guides. Feedrol...

Dubois SP12 Lineal Sprayer

• Manufacturer: Dubois

One Used Dubois SP12 Lineal Sprayer, this was purchased new in 2014, and the optional exhaust system was added in 2019, a new pump was installed in 2021. Standard features: � Compatible with both waterborne and...

Dubois Lineal Sprayer, SP12 Lineal Sprayer

• Manufacturer: Dubois

One Used Dubois SP12 Lineal Sprayer, this was purchased new in 2014, and the optional exhaust system was added in 2019, a new pump was installed in 2021. Standard features: � Compatible with both waterborne and...

WEINIG Moulder, Model Unimat 23E 5 Head Moulder

• Manufacturer: Weinig
• Model: Unimat 23

Used One Used WEINIG Model Unimat 23E 5 Head Moulder 4 3/4" X 9" Working Capacity Head sequence 1st Bottom head 10 HP 2nd Right side head 20 HP 3rd Left side head 20 HP 4t...

SAC Model RS/630 Heavy Duty Single Sided Planer

• Manufacturer: SAC

Used SAC Model RS/630 Heavy Duty Single Sided Planer. 24" wide x 9.4" opening. 4 knife 4-3/4" diameter cutterhead belt driven. 7 1/2 HP 3 phase motor wired 460 volts. Variable feed speed 13 to 58 FPM (2) steel...

SCM Model M2 Gang Ripsaw

• Manufacturer: SCM / SCMI

Used SCM Model M2 Gang Ripsaw 7-15/16" width cap. 4-1/2" max. depth of cut 23-9/16" throat depth Minimum board length: 14" 70mm arbor with two 20 mm x 5 mm keys for 12" to 14" dia. saw blades 36 HP motor main mot...

SAC Single Sided Planer, Model RS/630 Heavy Duty Single Sided Planer

• Manufacturer: SAC

One Used SAC Model RS/630 Heavy Duty Single Sided Planer. 24" wide x 9.4" opening. 4 knife 4-3/4" diameter cutterhead belt driven. 7 1/2 HP 3 phase motor wired 460 volts. Variable feed speed 13 to 58 FPM (2) s...

2025 XCMG XE55U

• Manufacturer: XCMG
• Model: XE55
• HP: 41.2 horsepower
• Operating weight: 5,699.837072 kilogram

The XE55U has a Kubota engine and meets the T4F emission standards and provides excellent performance and less fuel consumption. The XE55U is very versatile with its compact tail swing and variable angle boom of ...

2022 XCMG XE80U

• Manufacturer: XCMG
• Model: XE80U
• HP: 73.2 horsepower
• Hours: 6 hour

Financing as low as 0% *Terms & Conditions Apply The XE80U comes with every feature you expect from a small excavator in its tonnage. Variable angle boom, 62° to the left and 50° to the right, reduced swing tail...

2022 XCMG XE18U

• Manufacturer: XCMG
• Model: XE18
• HP: 15.8 horsepower
• Hours: 8 hour

Financing as low as 0% *Terms & Conditions Apply With a powerful Kubota D902 engine and premium quality hydraulic componentry, the XE18U delivers efficient and durable performance. The ROPS and FOPS canopy meets...

Yamaha F40LA

• Manufacturer: Yamaha
• Model: F40LA

Length:Year:2025 Category:Stock Number:25-F40LA Only 214 pounds Available in a 20” shaft Powerful 17-amp alternator Optional Variable Trolling RPM Switch (VTS) Electric start engine Requires controls, cables and ...

Yamaha VF90XA

• Manufacturer: Yamaha
• Model: VF90

Length:Year:2023 Category:Stock Number:23-VF90XA Only 353 pounds Powerful 35-amp alternator 35 amps of charging power Optional Variable Trolling RPM via gauge or remote switch Electric start Propeller sold separa...

Yamaha VF90XB

• Manufacturer: Yamaha
• Model: VF90

Length:Year:2024 Category:Stock Number:24-VF90XB Only 353 pounds Powerful 35-amp alternator 35 amps of charging power Optional Variable Trolling RPM via gauge or remote switch Electric start engine Controls, cabl...

Cap Retorquer Aesus Labelling Systems

• Manufacturer: Aesus
• Model: ECOCAP IV

“Good used condition.” Aesus Inline Cap Tightener – Retorquer – Year 2005 Retorquers are machines designed to reapply torque to caps or closures after an initial sealing process . The Aesus model ECOCAP IV In-Lin...