Used variable speed in Hamburg, Germany

2010 Case PUMA 225 CVX
- Manufacturer: Case IH
- Model: Puma 225
- Horsepower: 225 horsepower
- Hydraulic flow rate: 214.2543069744 liters per minute
Front hydraulics, rotating beacon left and right, LED front and rear work lights, front top link, hydraulic rear top link, automatic trailer hitch, K80 fixed attachment, rear weights, pressureless rear return, hy...
$66,142 USD
Wildeshausen, Germany
2016 FENDT 724 S4 PROFI PLUS
- Manufacturer: Fendt
- Model: 724 PROFI
- Horsepower: 246 horsepower
- Hydraulic flow rate: 193 liters per minute
Position control front, rotating beacon, ASW front LED, ASW rear LED, HYDRAULIC rear upper link, automatic trailer coupling, K80 fixed attachment, left-hand side, 193l pump, Stg tire pressure control system front...
$102,186 USD
Wildeshausen, Germany
2021 CLAAS ARION 660 CMATIC
- Manufacturer: Claas
- Model: ARION 660
- Horsepower: 205 horsepower
- Hydraulic flow rate: 150 liters per minute
600/65 R28 Vredestein Traxion XXL, 710/70 R38 Vredestein Traxion XXL, Claas 3.0 t front linkage including vibration damping, front PTO, electronic position control for front linkage, external operation for front ...
$103,349 USD
Wildeshausen, Germany
2010 Steyr 6180 CVT
- Manufacturer: Steyr
- Model: 6180 CVT
- Horsepower: 179 horsepower
Front hydraulics, rotating beacon, front LED ASW, rear LED ASW, mechanical rear top link, automatic tow bar, K80 fixed attachment, engine and transmission preheating, FL - hydraulic implement locking, unpressuriz...
$60,328 USD
Wildeshausen, Germany
2018 John Deere 6230 R
- Manufacturer: John Deere
- Model: 6230R
- Horsepower: 280 horsepower
- Gearbox type: Automatic
Rotating beacon, LED front ASW, LED rear ASW, hydraulic front top link, hydraulic rear top link, automatic trailer hitch, K80 fixed linkage, John Deere standard receiver steering system, 1 double-acting front hyd...
$114,976 USD
Westerstede, Germany
2015 FENDT 828 S4 PROFESSIONAL
- Manufacturer: Fendt
- Model: 828 VARIO S4
- Horsepower: 280 horsepower
- Fuel type: diesel
Front hydraulics, suspended front axle, compressed air system, rotating beacon, upper link at front, upper link at rear, automatic tow bar, K80 fixed attachment, load weights, other equipment: Wiwa rear, 7 inch t...
$92,884 USD
Westerstede, Germany
2014 FENDT 828 SCR PROFI PLUS | RÜFA | RTK
- Manufacturer: Fendt
- Model: 828
- Horsepower: 280 horsepower
- Hydraulic flow rate: 152 liters per minute
Reversing device, rotating beacon, front LED headlights, rear LED headlights, front top link, rear top link, automatic trailer hitch, K80 fixed linkage, single-circuit air brakes, RTK receiver, Novatel Smart7, 1 ...
$104,511 USD
Langwedel, Germany
2015 FENDT 828 S4 PROFI PLUS
- Manufacturer: Fendt
- Model: 828
- Horsepower: 280 horsepower
- Hydraulic flow rate: 152 liters per minute
7000 hours of service carried out in 07/2024, front hydraulics, rotating beacon, top link rear, automatic trailer coupling, K80 fixed attachment, top link front, Kotte forced steering left, long wheel bolts, cool...
$101,023 USD
Saterland, Germany
2017 Dammann DT 2500 H S4-TRACK
- Manufacturer: Dammann
- Model: DT 2500
- Flow Rate: 280 liters per minute
- Operating speed: 40 kilometer per hour
Ha Total: 65,000, Track: 1.9 m - 2.25 m, hydrostatic drive, electronically controlled all-wheel drive, air-suspended chassis, travel speed 0-40 km/h, permissible total weight 18.0 t, 6-cylinder MTU diesel engine ...
$174,275 USD
Wildeshausen, Germany
Knuth Werkzeugmaschinen
- Manufacturer: Knuth Werkzeugmaschinen
The versatile Servomill® KB 1500 bed-type milling machine with servo-conventional feed technology combines a heavy-duty machine frame, wide guideways and high drive power for superior cutting performance. The uni...
Wasbek, Germany
Knuth Werkzeugmaschinen
- Manufacturer: Knuth Werkzeugmaschinen
The versatile Servomill UWF with servo-conventional feed technology and on two levels swiveling cutter head is the top model of the Universal Milling Machine series. This series features an extra large work area ...
Wasbek, Germany
Knuth Werkzeugmaschinen
- Manufacturer: Knuth Werkzeugmaschinen
The versatile Servomill UWF with servo-conventional feed technology and on two levels swiveling cutter head is the top model of the Universal Milling Machine series. This series features an extra large work area ...
Wasbek, Germany
Knuth Werkzeugmaschinen
- Manufacturer: Knuth Werkzeugmaschinen
The versatile Servomill UWF with servo-conventional feed technology and on two levels swiveling cutter head is the top model of the Universal Milling Machine series. This series features an extra large work area ...
Wasbek, Germany
2024 Iseki SXG 324 #300322824
- Manufacturer: Iseki
- Model: SXG 324
SXG 324 (0010) ISEKI SXG324 (0020) Engine: (0030) 3 cylinder engine (0040) 20 HP (0050) 1,123cc displacement (0060) Transmission: (0070) Continuously variable hydrostatic transmission (0080) Maximum speed of 16.6...
$22,092 USD
Nienburg, Germany
2019 Case Optum 270 CVX with RTK
- Manufacturer: Case IH
- Model: Optum 270
- Horsepower: 290 horsepower
Speed: 40 km/h Front loader type: 6 Hydraulic output: 220 Engine manufacturer: FPT Transmission designation: CVX Height-adjustable hitch, ISOBUS, three-point/rear linkage, three-point external control, electronic...
$97,552 USD
Stuhr, Germany