Building Filters
- Trusted Seller
2004 INGERSOLL RAND N55NIRVANA
- Manufacturer: Ingersoll Rand
- Model: Nirvana
Capacity [m³/min]: 10.7 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric variable speed drive | Stars: Very Good | Weight [kg]: 1048 | Power [kw]: 55 | Outside condition: Very good | Ce mark...
Waregem, Belgium - Trusted Seller
1994 WEINIG PROFIMAT 23 Moulder
- Manufacturer: Weinig
- Model: Profimat 23
Capacity: 260 x 130 mm. Number of shafts: 5 Shaft diameter 40 mm Below 7.5 kW, right/left 7.5 kW, above 11 kW, below 5.5 kW Cardan drive Pneumatic pressers Variable feed speed, motor 2.2 kW Feed table 2200 mm Mot...
Kortrijk, Belgium - Trusted Seller
2005 LEADERMAC LMS-423S Planer all round
- Manufacturer: Leadermac
Capacity: 230 x 125 mm. Number of axes: 4 Axis diameter 40 mm Bottom 6.3 kW, right/left 7.5 kW, top 7.5 kW Mobile axis for various widths Pneumatic pressers Variable feed speed Motorized height adjustment of the ...
Kortrijk, Belgium 
planetary mixer VMI TYPE 40L/20L (reconditioned)
with stainless steel tub of 40l and 20l with each time the three accessories for the 40 and 20l (beater, pallet and hook) with part in stainless steel frame with variable speed control with timer with inox safety...
Izegem, Belgium- Trusted Seller
Wilhelmsburger DWV 75
- Manufacturer: Wilhelmsburger
3 cardan driven rolls, therefore no slipping/skidding and also ideal for conical rolling - Digital readout - Electromagnetic clutch - 2 speeds (variable) 3 + 6 m/min - Engine: 220 160 kWt - Rolling capacity: w...
Deinze, Belgium - Trusted Seller
1994 WEINIG PROFIMAT 23 Planer all round
- Manufacturer: Weinig
- Model: Profimat 23
Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Mobile axle for various widths Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 ...
Kortrijk, Belgium - Trusted Seller
“Berief” drum blancher
- Manufacturer: Berief
continuous blanching / pasteurizing / cooking vessel or cooling plant nett length ± 11 m all stainless steel adjustable speed variable dwell adjustment steam heated · connection 400 kg / h (5 bar) heat exchange...
Zwevegem, Belgium - Trusted Seller
“GEA-CFS” former MultiFormer, Type MLF 400
- Manufacturer: CFS/Koppens
- Model: MultiFormer MLF400
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile var...
Zwevegem, Belgium - Trusted Seller
CNC Scharmann Turntable 3500 x 1650 mm
- Manufacturer: Scharmann
Heavy Duty CNC turntable X-travel: 2500 mm Full CNC controlled 360° full continuous CNC turning Siemens servocontrolled motors Can easily be connected to any control Max weight on table: +30 ton variable turning ...
Deinze, Belgium - Trusted Seller
2005 WEINIG PROFIMAT 26 FORTEC +... Moulder
- Manufacturer: Weinig
- Model: Profimat 26
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table rolle...
Kortrijk, Belgium - Trusted Seller
2004 BOERE ELITE 1300 BCS + TCS... Top and bottom calibrating sander
- Manufacturer: Boere
Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW 1 x Segmented shoe,...
Kortrijk, Belgium 
Planetary mixer VEMA MIXER type FM60 (used, like new)
-planetary mixer in painted version -with stainless steel container of 60 liters -with three accessories in stainless steel (wire gard, pallet and hook) - with digital panel -variable speed, frequency controller,...
Izegem, Belgium- Trusted Seller
Akyapak APK 101
- Manufacturer: Akyapak
- Model: APK 101
max section cm3: 45 80 • Steel (St-52) construction body • The rolls are driven by a hydraulic motor, planetary gearbox and gears. • Shafts are made of special steel, hardened and grinded. • Guide rolls are adju...
Deinze, Belgium - Trusted Seller
2000 KOCH DL 80 Dowel inserting machine
- Manufacturer: Koch
- Model: DL-80
Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport wit...
Kortrijk, Belgium - Trusted Seller
B&K Bronx Cut-to-length 1375 x 4mm
- Manufacturer: B & K
Complete decoiling and cut-to-length line (weight: 12T) Including: * Coil Feed Lift car * Decoiler 15 Ton - Mandrel Ø Ø 635mm - Coil width: 1375 mm Hydraulic lateral movement 305 mm * Roller Beveler: 17 Rolls (8...
Deinze, Belgium