Search By Category

Search By Manufacturer

Building Filters

294

Used variable speed in Connecticut, USA

  • 6000 Lb., American Steel, No.

    6000 Lb., American Steel, No. 1000, 32", American Steel Line Reel with Coil Car

    • Manufacturer: American Steel Line
    • Model: 1000

    American Steel Line 6,000 Lb 460 Volts Payout Reel With Coil Car 32”Max Width with out Keepers 24” with Keepers Min ID 16” Max ID 28” Max OD 60” Variable Speed DC Controller 240 Volt Input Sonitrol Loop Control (...

    Thomaston, CT
  • 45Ton, Perkins, No. 45S, 3"Str,

    45Ton, Perkins, No. 45S, 3"Str, 18" x 31" Bed, 100-300 SPM

    • Manufacturer: Perkins

    MACHINE SPECS PERKINS OBG PRESS Model 45-S 45 Ton Capacity 3" Stroke 2" Adjustment 11 3/8" Shut Height over 2 1/2" x 18" x 31 1/2" Bolster Variable Speed 50-150 SPM Blaze SDT4 Sliding Die Transfer 5 1/2 Stations ...

    Thomaston, CT
  • KZTS 300 mm Bar Peeling

    KZTS 300 mm Bar Peeling Machine PLBP-001294

    • Manufacturer: KZTS

    KZTS 300 mm Bar Peeling Machine PLBP-001294 Maximum raw bar diameter: 300 mm Minimum raw bar diameter: 100 mm Bar feed speed: 0.1 -10 m/min. (.33 - 33 FPM) Minimum bar length: 3,000mm (9'10") Feed Speed infinitel...

    Plainville, CT
  • Trusted Seller
    1979 LITTELL 308-5PDL 5 Roll

    1979 LITTELL 308-5PDL 5 Roll Straightener (13887)

    • Manufacturer: Littell
    • Model: 308-5PDL

    8" x 0.062" LITTELL MODEL 308-5PDL 5 ROLL STRAIGHTENER (13887) MACHINE 13887 - STRAIGHTENING ROLLS MOUNTED ON ANTI-FRICTION BEARINGS - UPPER ROLLS ADJUSTABLE EITHER INDIVIDUALLY OR TOGETHER - LOWER STRAIGHTENING ...

    North Branford, CT
  • Trusted Seller
    1979 LITTELL 308-5PDL 8" x

    1979 LITTELL 308-5PDL 8" x 0.062" 5 ROLL STRAIGHTENER (13886)

    • Manufacturer: Littell
    • Model: 308-5PDL

    8" X 0.062" LITTELL MODEL 308-5PDL 5 ROLL STRAIGHTENER (13886) MACHINE 13886 - STRAIGHTENING ROLLS MOUNTED ON ANTI-FRICTION BEARINGS - UPPER ROLLS ADJUSTABLE EITHER INDIVIDUALLY OR TOGETHER - LOWER STRAIGHTENING ...

    North Branford, CT
  • Trusted Seller
    Thermo Scientific Digital Mini Rotator,

    Thermo Scientific Digital Mini Rotator, Model 88882007

    • Manufacturer: Thermo Fisher Scientific

    Thermo Scientific Digital Mini Rotator, Model 88882007 is a versatile lab equipment designed to meet the rotational mixing needs of scientists in various research settings. This mini rotator offers precise contro...

    $750 USD
    East Lyme, CT
  • 75Ton, Perkins, No. 75-S, 4"Str,

    75Ton, Perkins, No. 75-S, 4"Str, Air clutch and brake, 4" st, 3" ram adj, 13" sh, recirc. lube, sliding transfer,40-120 spm

    • Manufacturer: Perkins

    MACHINE SPECS PERKINS OBG PRESS Model 75-S 75 Ton Capacity 4" Stroke 3" Adjustment 13" Shut Height over 3" x 24" x 38" Bolster Variable Speed 40-120 SPM Air Clutch and Brake Recirculating Lube Equipped with Blaze...

    Thomaston, CT
  • 75Ton, Perkins, No. 75S, 4"Str,

    75Ton, Perkins, No. 75S, 4"Str, 24" x 38" Bed, 100-300 SPM

    • Manufacturer: Perkins

    MACHINE SPECS PERKINS OBG PRESS Model 75-S 75 Ton Capacity 4" Stroke 3" Adjustment 13" Shut Height over 3" x 24" x 38" Bolster Variable Speed 40-120 SPM Air Clutch and Brake Recirculating Lube Equipped with Blaze...

    Thomaston, CT
  • ABBOTT 8ZSCR-36-192PH4-240HH4-VC-2150

    ABBOTT 8ZSCR-36-192PH4-240HH4-VC-2150

    • Manufacturer: Abbott

    TWO ARGON/HYDROGEN ATMOSPHERE 36” BELT FURNACES WITH SILICON CARBIDE MUFFLE IN HIGH HEAT SECTION. PARTS ARE LOADED ON VARIABLE SPEED MESH BELT AT 6'LONG LOAD A...

    Tolland, CT
  • Sharpe LMV 42"Table 3Hp 220/440

    Sharpe LMV 42"Table 3Hp 220/440 Volt 3Ph Milling Machine W/Proto Trak D.R.O

    • Manufacturer: TRAK

    Sharpe LMV 42"Table 3Hp 220/440 Volt 3Ph Milling Machine W/Proto Trak D.R.O 5" Quill Variable Speed High/Low Rpm Range Fwd/Rev Drive One Shot Manual Oiler Milling Vise Proto Trak Plus Tri-Axis D.R.O. New 2/91 120...

    Watertown, CT
  • Trusted Seller
    RUESCH MFG. CO. FINE WIRE

    RUESCH MFG. CO. FINE WIRE DRAWING MACHIN (14469)

    • Manufacturer: Ruesch

    RUESCH TUB TYPE WET WIRE DRAWING MACHINE (14469) MANUFACTURER: H.J. RUESCH & CO. TWIN HORIZONTAL BLOCKS -9" (228 MM) WIDE TUB TYPE WIRE DRAWER WITH SPRAY LUBRICATION PAYOFF:-TYPE: HORIZONTAL DRUM -MANUFACTURER: M...

    North Branford, CT
  • Trusted Seller
    KRONES 18-Station Unimodul Pressure Sensitive

    KRONES 18-Station Unimodul Pressure Sensitive Labeler

    • Manufacturer: Krones

    KRONES 18-Station Unimodul Pressure Sensitive Labeler - Series 605 - Equipped with (2) labeling modules for pressure sensitive labeling - Capable of front, front & back or wrap around labeling - Right to left...

    Hartford, CT
  • ABBOTT 8ZSCR-12-216HH5-86PC/H3-2100

    ABBOTT 8ZSCR-12-216HH5-86PC/H3-2100

    • Manufacturer: Abbott

    12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE PURGE, 18' HEAT CHAMBER, 7' H...

    Tolland, CT
  • Beseler TD-20-19-3PH Heat Shrink Tunnel

    Beseler TD-20-19-3PH Heat Shrink Tunnel See Description 460v

    • Manufacturer: Beseler

    Seller Bought For Brand New For 20,000 And Was Never Put Into Service. High Performance Heat Shrink Tunnel Is Low Maintenance and Easy to Use - Durable electro-static powder finish - Heavy duty cal-rod heaters - ...

    Watertown, CT
  • U.S Baird 4L37 Transfer Press

    U.S Baird 4L37 Transfer Press With 5" Stroke 12 Station

    • Manufacturer: U.S. Baird

    Minster Air Clutch / Brake Combo 12 Station US Baird Die Set Stripper Fork System on Back Rack with 3 Forks and Rack Pull Down Pressmate 2 Row Stagger Mechanical feed Eddy Current variable speed motor Built in Di...

    Watertown, CT
89101112