Used variable speed in Bavaria, Germany

Steyr Absolut 6185 CVT
- Manufacturer: Steyr
- Model: 6185 CVT
- Cylinders: 6 cyl.
Tires: front: 540/65R30 / 100 % rear: 650/65R38 / 100 % Equipment: Height-adjustable hitch, ISOBUS, Ball hitch (K80), Three-point / rear linkage hitch, Three-point external control, Electronic linkage control (EH...
Pfreimd, Germany
Bihler BZ2-S8
- Manufacturer: Bihler
High-performance manufacturing system for mass production of stamped and formed parts and sub-assemblies High production speeds up to 700 spm New : All processing units driven by servo motors New : Larger working...
Halblech, Germany
Bihler MCS 1
- Manufacturer: Bihler
High-performance machine system with two processing faces for mass production Very high production speeds up to 800 1/min. Maximum economic efficiency through joint radial and linear production of parts and simpl...
Halblech, Germany
Bihler MCS 05
- Manufacturer: Bihler
High-performance machine system with two processing faces for mass production of large stamped and formed parts and sub-assemblies Very high production speeds up to 500 1/min. Maximum economic efficiency through ...
Halblech, Germany
Bihler RM-NC
- Manufacturer: Bihler
Powerful servo machining system for an efficient production of stamped and formed parts made from strip or wire as well as round bodies in small and medium batch sizes High production speeds up to 300 1/min . Sta...
Halblech, Germany
Bihler GRM 80P
- Manufacturer: Bihler
Powerful machining system for mass production of larger stamped and formed parts as well as sub-assemblies High production speeds of up to 250 1/min. Maximum processing room thanks to the spatial division of stam...
Halblech, Germany
Bihler CC 1
- Manufacturer: Bihler
Powerful machining system for mass production of longer and larger-sized stamped and formed parts as well as sub-assemblies High production speeds of up to 200 1/min. NC feed units available for long feed lengths...
Halblech, Germany
Bihler GRM-NC
- Manufacturer: Bihler
High performance servo machining system for stamped and formed parts, wire parts as well as round bodies and progressive components in small and medium batch sizes High production speeds up to 250 1/min. Standard...
Halblech, Germany
JUKI MO-6900S Series MO-6900R Series(variable top-feed)
- Manufacturer: Juki
Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it...
Wörth, Germany
2009 Fendt Teile aus 936, 927,
- Manufacturer: Fendt
- HP: 360 horsepower
Hp (kw): 360 HP (265 kW) | Compressed air brake system: Yes | Speed: 60 km/h | Air conditioning: Air conditioning | Platform: Driver's cab | Gear: infinitely variable | Front linkage: Yes
Schierling, Germany
2003 Case IH CVX 1135
- Manufacturer: Case IH
- Model: CVX
- HP: 135 horsepower
- Hours: 14,200 hour
Hp (kw): 135 HP (99 kW) | Operating hours: 14200 Hours | Drive: Four-wheel drive | Front loader: Yes | Speed: 50 km/h | Air conditioning: Air conditioning and heating | Air cushioned seat: Yes | Platform: Driver...
$31,647 USD
Markt Schwaben, Germany
2018 CLAAS Axion 870 CMATIC, Cebis Touch, S10-GPS, TOP
- Manufacturer: Claas
- Model: AXION 870
- HP: 284 horsepower
- Hours: 2,463 hour
Hp (kw): 284 HP (209 kW) | Operating hours: 2463 Hours | Drive: Four-wheel drive | Hitch: Automatic | Work searchlight: Yes | On-board computer: Yes | Electronic lifting gear control: Yes | Sprung front axle: Ye...
$139,737 USD
Schierling, Germany
KrämerGrebeCFSK+GWetter SM200
- Manufacturer: KrämerGrebeCFSK+GWetter
Krämer + Grebe CFS K+G Wetter Bowl Cutter 200 Litre Typ SM 200 Machine stainless steel Bowl stainless steel 5 knife speeds (variable speed) 2 bowl speeds mix speeds forward and reverse noise cover loading ejector
Lohr a. Main, Germany
2009 BKT Agrotron TTV 620
- Manufacturer: Deutz
- Model: AGROTRON TTV 620
- HP: 170 horsepower
Hp (kw): 170 HP (125 kW) | Operating hours: 9473 Hours | Drive: Four-wheel drive | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Front live power take-off: Yes | Sprung front axle: Ye...
$42,305 USD
Hutthurm, Germany
2017 CLAAS Axion 930 CMATIC, GPS S10 RTK, Frontzapfwelle, FKH
- Manufacturer: Claas
- Model: AXION 930
- HP: 355 horsepower
- Hours: 13,200 hour
Hp (kw): 350 HP (257 kW) | Operating hours: 13200 Hours | Drive: Four-wheel drive | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Hydr...
$69,576 USD
Schierling, Germany