Building Filters
- Trusted Seller
HERR VOSS STRAND EXTENSIONER
- Manufacturer: Herr Voss
Very Good 62.5" Strand Extensioner and Exit Stand: S-294 / Strand Extensioner slitting can produce a higher quality slit than the master coil. This process will slit, provide shape correction, maintain critical m...
Banner Elk, NC - Trusted Seller
ITW MULLER 606 BFT OCTOPUS STRETCH WRAPPING MACHINE
- Manufacturer: Muller
PERFORMANCE: MAXIMUM LOAD SIZE: 48" W X 50" L X 80" H (69" DIAMETER) MINIMUM LOAD SIZE: 36" X 36" X 28" H (FILM CLAMP JUSTIFIED) MAXIMUM LOAD WEIGHT: 4,800 LBS (WITH ITW MULLER CONVEYOR) WRAP SPEED: UP TO 100 LOA...
- Trusted Seller
2018 Wangda Group WD-TP-RPM 2800 IV
- Manufacturer: Wangda Group
WD-TP-RPM 2800 IV Toilet Paper Rewinding and Perforating Machine with: 1. Automatic change perforation size (Change number in PLC) Perforation range between 75mm-280mm 2. Auto paper tension control (independent m...
- Trusted Seller
PRUTTON 150
- Manufacturer: Prutton
Equipped With * Hydraulic motor with variable speed ** Feed All rod feeder (Sold separately) >Can hold large qty of rods to feed into the rack feed of threader automatically ** Lot Qty of Die adapters, Die spacer...
North America - Trusted Seller
2005 YIEH CHEN YC-30
- Manufacturer: YIEH CHEN
Equipped With * Cam Operated Rolling Slide * Adjustable Skew * Cycle Timer * Adjustable Work Rest SPECIFICATIONS: Outside diameter 5/16"-1-9/16" WORKPIECE RANGE Thread pitch 40-8 TPI Max. length 6" Rolling speed ...
North America - Trusted Seller
REED A22
- Manufacturer: Reed
- Model: A22
Equipped With 3 Sets of Thread Roll Die Hangers/Holders Misc. Die
North America - Trusted Seller
1998 YIEH CHEN YC-3
- Manufacturer: YIEH CHEN
Equipped With * Push Button Start/Stop * Cam Operated Rolling Slide * Adjustable Skew * Coolant Pump and Tank * Manual Lubrication * Work Support Workpiece Range: Roll Dies: Max. Center Distance of Die-Spindle: 1...
North America - Trusted Seller
2015 PEE-WEE P15U CNC
- Manufacturer: PEE WEE
- Threading length: 54 mm
Equipped With * Automatic central lubrication * Complete hydraulic system * PC control from Siemens with PEE-WEE CNC software * Control panel display Siemens * AC servo drive for E-pitch * Pressure & positioning ...
North America - Trusted Seller
1996 YIEH CHEN YC-20D
- Manufacturer: YIEH CHEN
Equipped With *Coolant system Max. center distance of die-spindle: 140mm Min. center distance of die-spindle: 100mm
North America - Trusted Seller
BAD DUBEN PRX15E
- Manufacturer: BAD DUBEN
Equipped With * Swivel Spindles Max. rolling pressure: 15 T (150kN) | Workpiece diameter: 6 - 40mm | Rolling slide stroke: 120mm | Max. tool diameter: 195mm | Spindle dia: 68.95mm | Max. swivel ange: 10deg | Roll...
North America - Trusted Seller
LANDIS 24PW "Lan-Hy-Rol"
- Manufacturer: Landis
Equipped With * Extended spindles Diameter range: 0-3" | Finest pitch -un or an: 48 TPI | Coarsest pitch -un or an: 2 TPI | Coarsest pitch acme: 4 TPI | Coarsest pitch worm thread: 7 Diameteral pitch/equivalent |...
North America - Trusted Seller
1981 REED B210
- Manufacturer: Reed
Equipped With * InFeed Only * 7-10 Sets of Dies * 1/2 dozen Work Blades * Hydraulic Tank
North America 1983 IZPE V-2E
- Manufacturer: IZPE
1983 IZPE Model V-2E 2-1/2" Thru-Feed Thread Rolling Machine - Approx. 20 Sets of Dies, 9,10,11, and 13 TPI Dies, 0.315" - 3" Diameter Range, 7.08" Max. Roll Diameter
Phoenix, AZ
HARTFORD 312m
- Manufacturer: Hartford
5/16" Hartford 312M Hand Feed Thread Rolling Machine **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**
Phoenix, AZ
ERCOLINA CE40H3
- Manufacturer: Ercolina
- Model: CE40H3
Ercolina’s CE40 angle roll models are available either with manual or hydraulic center roll positioning. Vertical or horizontal operating position available. Ercolina’s affordable tube benders and fabricating ma...
Cuddy, PA
