Used thread rollers

LOT OF 6 INA KRE62-PP-A Stud Type Track Rollers NEW (Open Box)

This listing is for a NEW (Open Box) LOT OF 6 INA KRE62-PP-A. Stud-type track rollers with crowned outer ring and axial guidance. Each unit features a sealed needle roller bearing, eccentric bushing, and hex sock...

WAFIOS UNT20 (3/4")

• Manufacturer: Wafios

Equipped With Features: * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electronically Control of...

AMBA Hydraulic Rod Header

• Manufacturer: AMBA

Equipped With Specifications: * Six Models: Size Range: 10 - 20mm Features: These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully auto...

ROD CHOMPER HRH

• Manufacturer: ROD CHOMPER

Equipped With These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully automatically: ? Cutting of up to a 12 mm | 0.5 ? diameter rod ? P...

Rexnord ZNT8220712 Self-Aligning Take-Up Roller Bearing Assembly 2-7-16" Used

• Manufacturer: Rexnord

This is a used Rexnord Self-Aligning Take-up Bearing Assembly. Save thousands and buy used from Green Industrial today!

GROB RMOD

• Manufacturer: Grob

Equipped With Capacity: 1-15/16" | Spindle speeds: 22-502 | Spindle dia: 1.25"

WATERBURY #20

• Manufacturer: Waterbury Farrel
• Model: 20

Equipped With * Heavy Frame * V ram Max. thread dia.: 3/8" | Die pocket: 5-1/8" | Output: 50 PPM | Weight: 6,000 lbs.

WATERBURY #20

• Manufacturer: Waterbury Farrel
• Model: 20
• Threading length: 127 mm

Equipped With * Heavy Frame * V-ram * Top side feed rolls & cutoff for feeding wire from coil

WATERBURY FARREL #20

• Manufacturer: Waterbury Farrel
• Model: 20

Equipped With Rotovane Hopper Maximum thread diameter: 3/8" | Maximum thread & shank length: 3" | Production: 125ppm | Electrics: 400/440 Volts 3 PH 50 HZ | Motor: 10 HP | Weight approx.: 8,000 LBS

66" Valley Roller Co Rubber-Covered Idler Roll

• Manufacturer: Valley

66" Valley Roller Co Rubber-Covered Idler Roll. Rubber-Covered Idler Roll Dead Shaft (Threaded At Each End) Roll Face: 66" Shaft Diameter: 2.50" Journals: 2.125" Roll Diameter: 6.03125"

WILLIS SE 28 x 80 Engine Lathe with 6” spindle bore with A-11 mount, inch, metric, modular, and diametric pitch threads

• Manufacturer: Willis

WILLIS SE 28 x 80 Engine Lathe with 6” spindle bore with A-11 mount, inch, metric, modular, and diametric pitch threads The heavy duty Willis Mammoth SK & SE series conventional lathes are extremely robust, well-...

Shaffer Triple Roller Bar Mixer

• Manufacturer: Shaffer

Used Shaffer triple roller bar mixer. Model HS13, SN 0897351. Dough capacity 1300 lbs. Bowl dimensions 48 in. wide x 36 in. long x 55 in. deep, 4 in. long lip. Discharge height 32 in. tall. Removable sanitary bow...

Shaffer Triple Roller Bar Mixer , Model 16HS

• Manufacturer: Shaffer

Shaffer Roller Bar Mixer, Model: 16HS, SN: 591132, Bowl dimensions 48 in. wide x 45 in. long x 57 in. deep. 1,600 lbs. capacity, jacketed bowl, 2 in. threaded jacket ports. 39 in. tall dump height. 75/37.5 HP m...