Used thread cutting machine

OMCG FOLDER; Model; CnC 20 W6 product code: 33203

Hurry! This product has already been viewed 562 times! Don't miss out! OMCG CNC 20 Wire Bending Machine. With the supplied equipment. Processes wire diameters of 3 and 4 mm. 4-axis head. After straightening, it ...

F&P + Other 2000(2200)x5mm CTL Line UNUSED! #4904

• Manufacturer: F&P + Other

€ 485.000 WAS NEVER INSTALLED -- IT'S STILL PACKED > Built: 2005 STOP/START LINE -- ESPECIALLY SUITABLE FOR TANK MAKERS For material thicknesses from 1.5 to 5mm, Stainless steel 304/316 with resistance: 60 Kg/...

HILTI HSL4

• Manufacturer: Hilti

Typical Anchor Length (One Common Size): 131 mm (other lengths available: e.g. 111 mm, 156 mm) Approvals/ Standards/ Load Ratings: Certified for high tension & shear loads; suitable for seismic/ dynamic/ fatigue ...

Sentek vibration test system Shaker L1024m with PA115

• Manufacturer: Sentek

c Sentek Type: L1024m with PA115 Technical data: Sine Max (kgf / N): 1,000 / 9810 Random force rms (kgf / N): 1,000 / 9810 Shock force (6 ms) kgf: 2,000 / 19620 Usable frequency range Hz: 5-3500 Continuous moveme...

1987 HONDA

• Manufacturer: Honda

Second hand slitting line Manufactured: Honda Built: 1987 Overhauled electrical part: 2006 Material: CR, HR COIL Tensile Strength: Max. 60 kg/mm2 Yield Strength Max.: 36 kg/mm2 Coil Weight: Max. 20,000 kg Line Sp...

F&P 1500x1.5mm Mini+ Slitting Lines (New) #4379

• Manufacturer: Floreani & Partners

Our "Basic" Slitting & Multi-Blanking* Lines, NEW for 1500mm x .4mm to max.1.5mm (M.S.) coils (* for use of the line to blank - operation practically possible up to a max. 6m sheet length - with no recoiling: ro...

F&P Heavy Gauge Slitting Lines (New) #3397-8

• Manufacturer: Floreani & Partners

L-Class NEW Heavy Duty Heavy Gauge Slitting Lines 2100mm x 12.7mm & 15mm Models -- Two "typical" Heavy Duty Coil Slitting Line Models that we build: suitable for max. 12.7mm and, resp. 15mm thick material (carbo...

F&P 2200mm x .25-3.0mm Alu. CTL Line #0022

• Manufacturer: Floreani & Partners

Flying Shear Type 40m / minute 25ton coils (ID 500mm, max. OD 1950mm, minimum width 1000mm) Product: minimum size 500x500mm, maximum size 2200x4000mm; max. stack weight 5ton Yield strength: Max 300 N/mm2 Ope...

2019 LASER CUTTING /ENGRAVING AND SEWING LINE -2020 (LIKE NEW)

We have available the following Nearly Not Used Machines from R&D Department, subject to prior sale: 1 TROTEC (AUSTRIA) LASER CUTTING & ENGRAVING SYSTEM Type SP-1500 Year 2018 (LIKE NEW CONDITION) Working area: 1...

Shenyang (SYMG) HTC40bm 500mm Horizontal CNC Machine for CE

• Manufacturer: Shenyang

HTC40 series CNC slant lathe is a high-quality product designed and produced in accordance with the market and development needs by combining our experience in designing horizontal CNC horizontal lathes for many ...

F&P Well Priced 2100x12mm CTL Lines (New) #4910

• Manufacturer: Floreani & Partners

Ref.: 11840-23/SR REV.1 < Click to enlarge images This is a 20m / minute well priced flying shear type cut to length line that we build. Workable material thicknesses: 6--12mm with a single leveler, 1.5--12mm ...

F&P 12mm CTL Lines (New) #3395

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Lines 2100mm x 12mm HR, Galv., Pickled Steel CUSTOM DESIGNED -- 12m / 10 Tonne Sheet Stacker Speed max. 30m / min -- The process material -dry or oiled- is: galvanized, pickled st...

F&P 12mm M.S. CTL Lines (New) #4910.1

• Manufacturer: Floreani & Partners

Ref.: 11840-23/SR REV.1 < Click to enlarge images This is a 20m / minute well priced flying shear type cut to length line that we build. Workable material thicknesses: 6--12mm with a single leveler, 1.5--12mm ...

ERLO TSAR-32 Drill

• Manufacturer: Erlo
• Drilling diameter: 32 mm

Reference: 191-C010 Table: 400x420 mm Column diameter: 125 mm Max drilling capacity in steel 70 kg: 32 mm Max steel threading capacity 70 kg: M28 Spindle taper: CM.4 Spindle travel: 160 mm Spindle-column distance...