Used table type in 14 Brandenburg, Germany

2010 PWB Tool Master 250 TCAM3

• Manufacturer: PWB

Application of rotary tools Measuring method: optical / point and line measurement (line, angle, radius, perpendicular, with center point and concentricity) Measuring beam movable by handwheel, X-axis = 140 mm an...

1986 WMW FW 4.5

• Manufacturer: WMW

Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice)

ALZMETALL AB4SV

• Manufacturer: Alzmetall
• Model: AB 4 SV

Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D.

1987 MAHO (DMG) MH 700 CB - 5 axis

• Manufacturer: Maho

NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -mach...

1976 WEYRAUCH F10-V

• Manufacturer: WEYRAUCH

Machine table feed 15 - 230 mm/min. via 12 steps Equipment: Sauter workpiece holder with 2 stations (Ø 125 mm and Ø 32 x 26 mm journals), hydraulic operation Coolant system Control panel; hand crank

1988 KELLENBERGER 600 U - Nr. 40

• Manufacturer: Kellenberger
• Model: 600U

Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm...

1980 WMW "FRITZ HECKERT" FU 315 V/2

• Manufacturer: Heckert

Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x...

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

WMW WEBO Gradua 30

• Manufacturer: WMW

All spindle heads with clockwise and counter-clockwise rotation Drill head 1 to 3 clockwise and counter-clockwise rotation without tapping function Drill head 4 with automatic thread-cutting function, rawhide chu...

Wheel Grinder - Double -

Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding bl...

2002 MITUTOYO Crysta-ApexC 574

• Manufacturer: Mitutoyo

CNC 3D coordinate measuring machine Measuring system/position control: CMMC-J type, optoelectronic glass scales and speed control via pulse generator Operating modes: CNC operation and/or joystick operation Measu...

1996 Technifor CN200SP

• Manufacturer: Technifor

Application for engraving and/or marking work on parts on both straight and curved surfaces. with manual height adjustment with handwheel, digital controls with control unit/device Technifor UC200; size 420x290x1...

INDUMASCH KF 500

• Manufacturer: Indumasch
• Model: KF 500

EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm...

1948 ROSCHER & EICHLER ST-III

• Manufacturer: Roscher & Eichler

VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted...

WMW nicht bekannt

• Manufacturer: WMW

Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 1...