Used systems and controls in Switzerland

TECHNOSOFT iPOS360x SY-CAN 6-Axis Motion System CANopen/EtherCAT

• Manufacturer: Technosoft

Motion system with up to 6 iPOS360x VX-CAN drive controllers For DC brushless, DC brush, stepper, linear, and voice coil motors Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC Up to 4 A continuous, 10 A peak per...

TECHNOSOFT Micro 4804 Multi Axis System CANopen or EtherCAT

• Manufacturer: Technosoft

Motion system with 3 or 4 Micro 4804 MZ drive controllers Brushless rotary and linear motors, voice coils , DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 5.7 A...

#10127; Mesh welding system MG230 Superflex

Year: 1992 (obsolete in 2024/25) Working range: Grid width: max. 3350 mm / min. 1000 mm Grid length: max. 9000 mm / min. 2500 mm Line wire pitch: infi­nitely adjustable, min. 75 mm Cross wire pitch: min. 100 mm L...

TECHNOSOFT iGVD71 BX-CAT 11-80V 100A 8KW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush motors Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC Output current: 100 A (71ARMS) nominal...

TECHNOSOFT iGVD71 BX-CAN 11-80V 100A 8KW CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless and DC brush motors Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18 – 36 VDC Output current: 100 A (71ARMS) nomi...

Coating Systems

Coating with hotmelt in a continuous process of continuous material from a roll is called balti, restricting and not quite correct, a coating plant. More information about coating with roller or spray process wit...

Robot Application Systems

• Manufacturer: Balti AG

Single or multiple stations with one robot are practically "everyday life in the bonding industry" today. You determine the type of robot, we build the system for you, run it in and hand over the "turnkey" system...

Plug- / Electrics-Socketing Systems

• Manufacturer: Balti AG

The outstanding machine technology with particularly gentle, controlled melting, conveying and dosing technology is predestined for high-quality process technology for plug and, above all, the ever-increasing ele...

Stierli-Bieger 2200 CNC

• Manufacturer: Stierli-Bieger

The "2200 CNC" hydraulic horizontal press ticks every box as far as flexibility and the range of performance of the control system are concerned. The CNC control is used primarily for pre-tensioning steel beams. ...

Stierli-Bieger 4400 CNC

• Manufacturer: Stierli-Bieger

The "4400 CC" hydraulic horizontal press ticks every box as far as flexibility and the range of performance of the control system are concerned. The CNC control is used primarily for pre-tensioning steel beams. T...

Stierli-Bieger 120 CNC

• Manufacturer: Stierli-Bieger
• Model: 120

The Stierli-Bieger 120 CNC bending center is a very efficient system that is equipped with a modern touchscreen and 2-axis control. The operator can program the system very easily. 200 programs each with 10 bends...

Stierli-Bieger 820 CNC

• Manufacturer: Stierli-Bieger

The Stierli-Bieger 820 CNC is a very efficient, versatile bending and straightening machine that is equipped with a modern touchscreen color display and 2-axis control. The operator can program the system very ea...

Stierli-Bieger 3300 CNC

• Manufacturer: Stierli-Bieger

The "3300 CC" hydraulic horizontal press ticks every box as far as flexibility and the range of performance of the control system are concerned. The CNC control is used primarily for pre-tensioning steel beams. T...

Stierli-Bieger 1300 CNC

• Manufacturer: Stierli-Bieger

The Stierli-Bieger 1300 CNC is a very powerful, versatile bending and straightening machine that is equipped with a modern touchscreen color display and 2-axis control. The operator can program the system very ea...

Stierli-Bieger 220 CNC

• Manufacturer: Stierli-Bieger

The Stierli-Bieger 220 CNC is a very efficient system that is equipped with a modern touchscreen color display and 2-axis control. The operator can program the system very easily. The bending angles required can ...