Used system sensor in Bavaria, Germany

Trusted Seller
process monitoring (oxygen)
- Manufacturer: Hach Lange GmbH
Additional title: orbisphere 410 | Memory: 10000 measurent | Power: 25 W | Voltage: 100/240 V AC | Frequency: 50/60 Hz | Length: 230,5 mm | Width: 220 mm | Height: 253,5 mm | Weight: 3 kg | Material: stainless s...
Freising, Germany
Trusted Seller
conductivity compact device
- Manufacturer: Endress+Hauser
Additional title: toroidal conductivity measuring system for hygienic and sterile applications | Measuring range: 1000 mS/cm | Process temperature: 125 °C | Process pressure: 12 bar bei 20 °C | Power: 7,5 W | Vo...
Freising, Germany
MaxPhotonics | Safety cable with clamp (loop)
Description of the Safety cable for the laser system - workpiece connection Additional information
$94 USD
Bad Wörishofen, Germany
Trusted Seller
Paramix system with carbonation unit; 2010 (overhauled and modernized)
- Manufacturer: Holstein und Kappert
PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 ...
Freising, Germany
Trusted Seller
Paramix system with carbonation unit; 2010 (overhauled and modernized)
- Manufacturer: Holstein und Kappert
PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 ...
Freising, Germany
Trusted Seller
2-vessel brewhouse 10 hl
- Manufacturer: JBT GmbH
2-unit brewhouse with stainless steel brewing vessels mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforate...
Freising, Germany
Trusted Seller
2-vessel-brewhouse
- Manufacturer: Škrlj
2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...
Freising, Germany
Trusted Seller
Mash/lauter tun
- Manufacturer: ROLEC
Mash/lauter tun with side heating. The vessel was used in a distillery where 400 kg of malt grist was used to produce 15 hl of wort with 16.5°Plato. The lautering time was approx. 2 hours.
Freising, Germany
Trusted Seller
refrigeration plant
- Manufacturer: Trane Roggenkamp
Refrigeration system with refrigerant R134a. The system consists of the following components: - Refrigeration compressor (Trane Roggenkamp, 2018, commissioned in 2020) - Condenser (Roggenkamp, 2019), installed o...
Freising, Germany
Trusted Seller
Pressure boosting station with hygiene center
- Manufacturer: Jürgen Löhrke GmbH
Additional title: Booster station with chemical dosing pumps | Position: standing on frame with protective screen | Features: Centrifugal pump (Grundfos), 1 pressure sensor, 4 diaphragm metering pumps with PVDF ...
Freising, Germany
Trusted Seller
NH3 fluid separator
- Manufacturer: vbw-weihenstephan
Additional title: for refridgeration plant | Cooling capacity: 100 kW at -8/+30 °C | Operating pressure: 13 bar within +50/-10°C, resp. 12 bar within -10/-60 °C | Complete volume: 523 l refrigerant capacity appr...
Freising, Germany
Trusted Seller
PVPP-Filter
- Manufacturer: FILTROX
Additional title: Filtrox ZHF | Filter capacity: 200 hl/h | Volume: 16 hl | Operating pressure: 6 bar | Operating temperature: 100 °C | Systemic volume: 1620 Liter | Width: 1,2 m | Height: 2,85 m | Weight: 2500...
Freising, Germany
Trusted Seller
2023 Prodeco Nano E55
- Manufacturer: Prodeco
CE marking, automatic operation with fill level sensor The Nano briquette press is ideal for small-scale production. Due to its compact design, it can be installed under an existing extraction system without grea...
Egenhofen, Germany
Trusted Seller
ASM SIPLACE 12mm X Feeder 00141291-01 00141271-01
- Manufacturer: ASM
ASM SIPLACE 12mm X Feeder 00141291-01 00141271-01 12mm X Feeder used tested Cleaned and tested on the original ASM Verification System On request (if available also NEW) Feeder on request with or without splice 0...
Ingolstadt, Germany
Trusted Seller
ASM SIPLACE 16mm X-Feeder 00141292-01 00141272-01
- Manufacturer: ASM
ASM SIPLACE 16mm X feeder 00141292-01 00141272-01 16mm X Feeder used verified Cleaned and tested on the original ASM Verification System On request (if available also NEW) Feeder on request with or without splice...
Ingolstadt, Germany