Building Filters
- Trusted Seller
Automatic Laminator
- Manufacturer: BBS
Automatic High Speed Flute Laminating Machine Function: The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be use...
Bologna, Italy - Trusted Seller
X-Press flex ASR 530
- Manufacturer: Orient
The X-Press flex ASR 530 series is our 530 mm in-line Flexo press. This highly efficient and precise press is suited for printing on very thin films along with paper. This along with its width makes it an ideal r...
Bologna, Italy 
Jungheinrich ERC214 man-on-board stacker
- Manufacturer: Jungheinrich
- Model: ERC 214
- Lifting capacity: 1,400 kg
- Operating weight: 1,200 kg
Jungheinrich brand man-on-board stacker model ERC214 with Electric propulsion, capacity 14 , lifting height 4400 mm
Budrio, Italy
Jungheinrich EJC 212 walk-behind pallet stacker
- Manufacturer: Jungheinrich
- Model: EJC 212
- Lifting capacity: 1,200 kg
- Mast type: triplex
Jungheinrich brand man walk-behind stacker model EJC 112 with Electric propulsion, capacity 12 , lifting height 3200 mm
Budrio, Italy
BT SWE 120 L Stacker Man on Board
- Manufacturer: BT
- Model: SWE120L
- Lifting capacity: 1,200 kg
- Operating weight: 700 kg
BT brand man-on-board stacker model SWE 120 L Duplex mast GAL (Hilo) 3300 mm Rated capacity 1200 kg
Budrio, Italy
Tek-Ind EXT-01 - NF
- Manufacturer: Tek Ind
To finish the line, the belts must be collected in boxes, this function is performed by the guided exit for belts EXT-01, this allows you to manage from 1 to 8 belts at the exit. The line collects the belts exiti...
Fidenza, Italy
Tek-Ind INT-02 - NF
- Manufacturer: Tek Ind
The INT-02 ribbon feeder is used in combination with any ribbon printing machine. Its function is to feed the printing lines while keeping the ribbon flat, and without it turning on itself. This feeder allows the...
Fidenza, Italy
2001 Fantuzzi FDC 320
- Manufacturer: Fantuzzi
- Model: FDC 320
- Hours: 28,000 h
- Lifting capacity: 9,000 kg
Siddeshift + Forks positioning + Coils ram Engine: VOLVO TAD 731 VE | Transmission: Dana Clark 32000 | Capacity: 32000 kg @ 1200 mm | Hour meter: 28000 | Mast type: Duplex | Tires: 16.00-25 | Cabin: Fully closed,...
Brescello, Italy
2010 Fantuzzi FDC 25 K7
- Manufacturer: Fantuzzi
- Model: FDC 25
- Hours: 19,000 h
- Lifting capacity: 25,000 kg
Spreader: Double Box type 20’-40’ hook type with side clamps | Engine: Volvo TAD 750 VE | Transmission: Dana Clark 32000 | Capacity: 9000 kg | Hour meter: 19000 | Mast type: Duplex | Tires: 14.00-24 | Cabin: Rai...
Brescello, Italy
2010 Fantuzzi FDC 250
- Manufacturer: Fantuzzi
- Model: FDC 250
- Hours: 20,000 h
- Lifting capacity: 9,000 kg
Sideshift + Forks positioning Stacking height: 4000 mm | Engine: VOLVO TAD 750 VE | Transmission: Dana Clark 32000 | Capacity: 25000 kg @ 1200 mm | Hour meter: 20000 | Mast type: Duplex | Tires: 14.00-24 | Cabin:...
Brescello, Italy
Man-on-foot stacker
- Manufacturer: MAN
Toyota pedestrian stacker, model HWE100, with electric drive. Single-mast, Simplex, height 1580 mm RATED CAPACITY: 1000 kg
Budrio, Italy
Jungheinrich hc10 g56 stacker
- Manufacturer: Jungheinrich
- Model: HC 10
Jungheinrich brand man walk stackers hc10 g56 lifting capacity 1,000 kg 24-volt electric drive Total height 1980 mm Lifting height 2900 mm Fork length 1150 mm
Budrio, Italy
2016 STILL EXV 16
- Manufacturer: Still
- Model: EXV 16
Features: Rated capacity Kg. 1,600 Center of gravity mm. 600 Year of construction 2016 Free view mast simplex - lift mm. 3,244 Rubber drive wheel Double rollers Forks mm. 1,150 Battery and rectifier Safety device...
Ferrara, Italy
2006 LINDE L14 SERIES 372
- Manufacturer: Linde
- Model: L14
Features: Rated capacity Kg. 1,400 Center of gravity mm. 600 Year of construction 2006 Free view mast simplex - lifting mm. 4,224 - minimum footprint mm. 2,640 Rubber drive wheel Single support rollers made of po...
Ferrara, Italy
2006 LINDE L12 SERIES 379
- Manufacturer: Linde
- Model: L12
Features: Nominal capacity 1,200 kg Center of gravity 600 mm Year of construction 2006 Simplex clear-view mast • Lifting height 4,224 mm • Minimum overall dimensions 2,640 mm Rubber drive wheel Single roller Fork...
Ferrara, Italy