Used sensors & controllers in Switzerland

Rimspolish & Ditel Ridi 13 Blackedition CNC I CNC Lathe for Tires

• Manufacturer: Rimspolish & Ditel

We hereby offer this used Rimspolish & Ditel Ridi 13 Blackedition CNC CNC lathe for tires from 2020, located in Switzerland. With a robust motor power configuration, delivering 1.2 kW in the X-axis and 1.8 kW in ...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

Huber Unistat 815 with "Pilot one" controller

• Manufacturer: Huber

Cooling/heating circulation thermostat with air-cooled chiller and visual level indicator. Stainless steel circulation pump with cooled shaft seal and exposed shaft, without bearings in the liquid. Automatic capa...

CNC SHARPENING MACHINE SCHNEEBERGER TYPE GEMINI DMR

• Manufacturer: Schneeberger

Fanuc Oi-MB – spindle HSK50 – 50-10'000 min-1 Partially rebuilt and in good working condition 2. Check all sensors and sensor cables. – 18 sensor cables have been replaced. – All sensor cables that were too long ...

CNC CYLINDRICAL GRINDER KELLENBERGER KEL-VARIA UR 175/1000

• Manufacturer: Kellenberger
• Model: Kel-Varia UR175/1000

Year 1999 with Fanuc 18 TB – 3 axes XZB – Marposs E30/E20 Inventory no. 2240002, machine with : CNC-control Fanuc 18TB Grinding wheel equipment left Ø 500 x 80 mm., ref.1310.01 Grinding wheel equipment right Ø 40...

Thermo BBD 6220

Protect cell culture samples from contamination and achieve reproducible results with the Thermo Scientific™ BBD 6220 CO2 incubator , which features active humidification control and an integrated high-temperatur...

Krohne Smartpat PH 8320

Function: The current loop-powered, 2-wire digital pH sensors for the water and wastewater waste water industry were used to determine the nitrification of urine. Other possible applications: Monitoring of biolog...

2008 MÜLLER PMLE 250 X 2000 R-HK Ref No: 50719

• Manufacturer: Muller

Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force...

1997 Shiongi Hicapseal S100 Sealing machine for hard gelatin capsules

• Manufacturer: Shiongi

Fully automatic capsule sealing machine. Incl. PLC: Siemens-S5, type: 954, Operating controll: Lauer PCS 095. Format part for capsule size. 3. Output: up to 100'000 capsules/h. Furthermore incl. Visco system TRAW...

2019 Somtas Bag master TC 8-28

• Manufacturer: Somtas

Somtas Bag master TC 8-28 year 2019 Model: Bag master TC 8-28 For the production of SOS square bottom paper bags with and without die-cut handles of various sizes, as bags for flour, bags for take away, shopping ...

Büchi / Pump Manager C-615

• Manufacturer: Büchi
• Model: C-615

Function: Control of up to two pump modules C-601 / C-605, allows easy creation of Binary solvent gradient. interface: 1 x RS232 (process data output) 1 x Mini DIN (TTL in / out for alarm monitoring and / or exte...

2012 Scae Dimatic ETH 471/110

• Manufacturer: Scae

Scae Dimatic ETH 471/110 year 2012 For the production of wicket bags with die-cut handle Mechanical speed (without film): 300 cycles/minute Min – max wicket holes distance: 45 – 330 mm Rounded bottom Tele-assista...

1998 SORALUCE SP 6000 Ref No: 53430

• Manufacturer: Soraluce
• Model: SP 6000

Known issues: - Milling head does not swivel due to a defective sensor - Gear stage 2 cannot be switched on

SCREW COMPRESSOR “AIRCRAFT” TYPE A-K-MAX 7.5-10-270F K

• Manufacturer: CHAMPION

1050 L/min at 10 bar, 7.5 Kw 400V – 62 Db Direct-drive screw compressor requiring no maintenance of the drive unit, equipped with a 270 L tank and refrigerated dryer, featuring an intelligent EasyTRONIC IV electr...

EMG 6T

• Manufacturer: EMG

Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual push-button safety control Stroke-by-stroke or continuou...