Used sensor control in Switzerland

Rimspolish & Ditel Ridi 13 Blackedition CNC I CNC Lathe for Tires

• Manufacturer: Rimspolish & Ditel

We hereby offer this used Rimspolish & Ditel Ridi 13 Blackedition CNC CNC lathe for tires from 2020, located in Switzerland. With a robust motor power configuration, delivering 1.2 kW in the X-axis and 1.8 kW in ...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

Huber Unistat 815 with "Pilot one" controller

• Manufacturer: Huber

Cooling/heating circulation thermostat with air-cooled chiller and visual level indicator. Stainless steel circulation pump with cooled shaft seal and exposed shaft, without bearings in the liquid. Automatic capa...

CNC CYLINDRICAL GRINDER KELLENBERGER KEL-VARIA UR 175/1000

• Manufacturer: Kellenberger
• Model: Kel-Varia UR175/1000

Inventory no. 2240002, machine with : CNC-control Fanuc 18TB Grinding wheel equipment left Ø 500 x 80 mm., ref.1310.01 Grinding wheel equipment right Ø 400 x 63 mm., ref.1311.02 Turning part with automatic indexi...

Thermo BBD 6220

Protect cell culture samples from contamination and achieve reproducible results with the Thermo Scientific™ BBD 6220 CO2 incubator , which features active humidification control and an integrated high-temperatur...

Krohne Smartpat PH 8320

Function: The current loop-powered, 2-wire digital pH sensors for the water and wastewater waste water industry were used to determine the nitrification of urine. Other possible applications: Monitoring of biolog...

SCREW COMPRESSOR “AIRCRAFT” TYPE A-K-MAX 7.5-10-270F K

• Manufacturer: CHAMPION

Technical Description Coaxial screw compressor with direct drive, requiring no maintenance of the drive unit and offering maximum energy efficiency. Standard features include the “EasyTRONIC IV” electronic contro...

2019 Somtas Bag master TC 8-28

• Manufacturer: Somtas

Somtas Bag master TC 8-28 year 2019 Model: Bag master TC 8-28 For the production of SOS square bottom paper bags with and without die-cut handles of various sizes, as bags for flour, bags for take away, shopping ...

Büchi / Pump Manager C-615

• Manufacturer: Büchi
• Model: C-615

Function: Control of up to two pump modules C-601 / C-605, allows easy creation of Binary solvent gradient. interface: 1 x RS232 (process data output) 1 x Mini DIN (TTL in / out for alarm monitoring and / or exte...

1997 Shiongi Hicapseal S100 Sealing machine for hard gelatin capsules

• Manufacturer: Shiongi

Fully automatic capsule sealing machine. Incl. PLC: Siemens-S5, type: 954, Operating controll: Lauer PCS 095. Format part for capsule size. 3. Output: up to 100'000 capsules/h. Furthermore incl. Visco system TRAW...

2012 Scae Dimatic ETH 471/110

• Manufacturer: Scae

Scae Dimatic ETH 471/110 year 2012 For the production of wicket bags with die-cut handle Mechanical speed (without film): 300 cycles/minute Min – max wicket holes distance: 45 – 330 mm Rounded bottom Tele-assista...

EMG 25T

• Manufacturer: EMG
• Shut height: 300 millimeter

Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual push-button safety control Stroke-by-stroke or continuou...

EMG 6T

• Manufacturer: EMG
• Shut height: 200 millimeter

Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual push-button safety control Stroke-by-stroke or continuou...

1993 Macchi coextruder

• Manufacturer: Macchi

Macchi coextruder year 1993 3 layers Dosing system: Doteco Grado, 3 units with 4 components each, centralized vacuum pump (retrofitted), all scales overhauled in 2024, new software, an external touch screen, neck...

EMG 15T

• Manufacturer: EMG
• Shut height: 300 millimeter

With electro-pneumatic mono-disc clutch Technical data Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual p...