Used sensor control in Mexico

RECIPROCATING SAW - 200 MM

• Manufacturer: amxmachinery.com

PART: 2CK-FR-200 - RECIPROCATING SAW BLADE FEED ROLLS & PRESSURE ROLLS Bottom Rolls - 7 pieces in Front Section & 5 pieces in Rear Section Top Front section is equipped with 7 pressure rollers & 3 air cylinders c...

SAW BLADES - 300 MM

• Manufacturer: amxmachinery.com

PART: 2CK-FR-300 - SAW BLADE IS VAIVED FEED ROLLS & PRESSURE ROLLS Bottom Rolls - 7 pieces in Front Section & 5 pieces in Rear Section Top Front section is equipped with 7 pressure rollers & 3 air cylinders contr...

BRIQUETTING MACHINE FOR WOOD - 7.5, 10 HP

PART: 4GR-G2-50 - BRIQUETTING MACHINE FOR WOOD - 7.5, 10 HP NEW WITH WARRANTY Volume reduction and production of heating material Developed for chips and dusts especially. These high-performance, robust and high-...

ENDRESS+HAUSER – FTL 260 – Point Level Switch – Vibronic – Inox – 10-55VDC – MADE IN GERMANY

• Manufacturer: Endress+Hauser

Technical description Compact vibronic point level switch. Highly reliable device for liquid detection. Insensitive to product buildup or media type. Made in Germany, with a 316Ti stainless steel body. Corrosion ...

LOT OF 5 NIASA J1 LINEAR ACTUATORS WITH 2.2KW MOTOR – MECA SOLAR / JACK SCREW 150kN – SPAIN

• Manufacturer: NIASA (Spain) MECA SOLAR MOTIVE (Italia)

🔹 TECHNICAL SPECIFICATIONS NIASA J1 LINEAR ACTUATOR * Type: Trapezoidal screw (TR) * Nominal force: 150 kN * Expansion: From 14” to 51” * Total stroke time: 14 minutes * PAM 90 Worm Gearbox * Gear ratio: 7.5 * Op...

SIMCO POWER UNIT 7 | FAULT DETECTOR | 90–240 VAC | 5–7 KV | USED

• Manufacturer: Simco

*️⃣ TECHNICAL DESCRIPTION The SIMCO POWER UNIT 7 is a power supply and fault detection unit used in industrial applications that require high-level voltage monitoring in ionization systems or electrostatic charge...

Labeler Printer Applicator FlexiMate eLinear

FlexiMate eLinear The eLinear is the electric applicator that rewrites the rules of print & apply systems. Faster than pneumatic systems, its technology allows a complete and highly precise control of the applica...

CONTINUOUS PAINTING BOOTH FOR MOULDINGS

PART # 2TA-TS-12ATSP - CONTINUOUS PAINT BOOTH FOR MOLDINGS New with warranty Features: PLC control for easy operator and variability setup. Fast spraying processing for profiles strips and two edges together or f...

TA-TS-12ATSP - CONTINUOUS PAINT BOOTH FOR MOLDINGS

PART: 2TA-TS-12ATSP - CONTINUOUS PAINT BOOTH FOR MOLDINGS New with warranty Features: PLC control for easy operator and variability setup. Fast spraying processing for profiles strips and two edges together or fo...

VERTICAL SLIDING TABLE SAW - EVOLUTION - CAP. 169" X 66" X 3-1/8" X 3-1/8

PART: 2ST-EVOLUTION - SAWING MACHINE VERTICAL SLIDING TABLE SAW - EVOLUTION - CAP. 169" X 66" X 3-1/8" X 3-1/8 NEW WITH WARRANTY EVOLUTION Same Features as Standard S, plus: - Full-wood back support - great for t...

LOT OF 4 NIASA J1 LINEAR ACTUATORS WITH 2.2KW MOTOR | 150kN | MECA SOLAR – MADE IN SPAIN

• Manufacturer: MECA SOLAR / NIASA / MOTIVE

– Lot of FOUR complete actuators with spindle + gearmotor. – Linear trapezoidal screw model J1, capacity 150kN. – Race from 14” to 51” in 14 minutes. – Worm gear reducer ratio 7.5:1, Box 063 type. – B14 type elec...