Building Filters
Canon EOS R5 C × Control Ring Mount Adapter EF-EOS R
- Manufacturer: Canon
- Model: EOS R5
The EOS R5 C is a digital cinema camera that allows the user to choose between the video performance of the CINEMA EOS SYSTEM and the high still image performance of the EOS R5 mirrorless camera by switching mode...
Saitama, Japan
2003 Mazak SQT-100M
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 100
MAZ-640T 6-inch hollow (Kitagawa BB06) 12-corner turret with milling function Push cup with touch sensor Part catcher Machine No. 163995
Handa, Japan
RED KOMODO 6K × SmallHD Indie 7 × Control Ring Mount Adapter EF-EOS R
- Manufacturer: Red
KOMODO is a Super 35mm 6K cinema camera with global shutter in a compact housing, RED RAW (R3D) recording on CFast 2.0 cards, and a Canon RF lens mount that can be used with a variety of lens adapters, including ...
Saitama, Japan
RED KOMODO-X 6K × SmallHD Indie 7 × Control Ring Mount Adapter EF-EOS R
- Manufacturer: Red
KOMODO-X features the same 6K S35 Global Shutter sensor as KOMODO, but has been redesigned and features major architectural improvements. Frame rates have been doubled to a maximum of 80 fps at 6K 17:9, 96 fps at...
Saitama, Japan
2008 Mori Seiki NV4000 DCG
- Manufacturer: Mori Seiki
- Model: NV-4000DCG
With spissle, with spissle BBT40, with spindles, with spindles, with spindles, with spindles MSX-501Ⅲ, T:600*400mm T:600*400mm, 2APC(swivel type) 2APC(swivel type), Spindle: 12000rpm Spindle: 12000rpm, ATC: 60 AT...
Toyohashi, Japan
2010 FANUC α-T21iFa
- Manufacturer: Fanuc
FANUC 31i-A5,. S:(X)500*(Y)400*(Z)330mm,. A-axis: 0.001°indexing, -15°to +105°, B-axis: 0.001°indexing, ±9999.9999.999mm B-axis: 0.001°indexing, ±9999999.999°, T: 650*400mm, S: (X500*(Y)400*(Z)330mm T:650*400mm, ...
Toyohashi, Japan
2005 Mazak FH-8800
- Manufacturer: Mazak
- Model: FH 8800
120 ATC, B-axis 1/1000 deg. B-axis 1/1000 deg. Side-through, Touch sensor Touch sensor In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
2006 Yamazaki Mazak PFH-4800
- Manufacturer: Mazak
- Model: PFH-4800
Mazatrol Fusion 640, BT40, ATC: 40 pieces, 1-degree indexing, Spindle through-coolant 8kgf, Spindle: 12000 rpm, Spindle: 560(X)*630(Y)*600(Z), Pallet: 400*400mm, 2 APC, Touch sensor, Chip conveyor *If there are a...
Toyohashi, Japan
2020 OKK VM76R Vertical Machining Center
- Manufacturer: OKK
- Model: VM76R
FANUC31i-B、T:1550*760, stroke:X1540Y760Z660, BT50, 6000rpm, Tool storage capacity:30, Touch sensor (Renishaw), Through spindle, chip conveyor, HQ control
Aichi, Japan
HORIBA, Ltd. EV-140C
- Manufacturer: Horiba
Optical Emission Spectroscopy Etching End-point Monitor This emission analysis type end-point monitor is intended for end-point detection or plasma condition control in the plasma-based semiconductor thin-film pr...
Kyoto, Japan
2006 OKK VM5Ⅲ Vertical Machining Center
- Manufacturer: OKK
- Model: VM5
Neo635V, T:1050×560, Stroke:X1020Y510Z510, Spindle:BT50, 6000rpm, ATC-20, Touch sensor, Scale:XYZ
Aichi, Japan
HORIBA STEC, Co., Ltd. SEC-E Series
- Manufacturer: Horiba
Mass Flow Controller This general purpose mass flow controller has a reliable thermal sensor and solenoid valve, allowing you to achieve high-level control of gas flow. A versatile component, the mass flow contro...
Kyoto, Japan
HORIBA STEC, Co., Ltd. PV Series
- Manufacturer: Horiba
Piezo Actuator Valve The Piezo Actuator Valve PV Series consists of piezo actuator valves with metal diaphragms and metal O-rings. When combined with a pressure sensor or flow rate sensor and ratio control unit (...
Kyoto, Japan
HORIBA STEC, Co., Ltd. SEC-Z700X Series
- Manufacturer: Horiba
Pressure Insensitive Mass Flow Controller The SEC-Z700X Series is equipped with reliable thermal sensors and a pressure insensitive function for stable flow rate control. The on-board pressure measurement reduces...
Kyoto, Japan
HORIBA STEC, Co., Ltd. LF-F/LV-F Series
- Manufacturer: Horiba
Digital Liquid Mass Flow Meters / Controllers The LF-F and LV-F Series are digital liquid mass flow controllers using a Peltier element which cools the liquid rather than using the more common method of thermal h...
Kyoto, Japan