Used saws, abrasive

6″ (152 mm) TUREK & HELLER Traveling Abrasive Saw #1445

• Manufacturer: Heller

1445 TUREK & HELLER 22" EVERETT Abrasive Saw Blade, Max. 2400 RPM Air Clamping Jaws for 2", 2-1/2", 3", 4", 4-3/4", 5-1/4" 3 Spare Blades 15′ x 7′ x 7′ 10,000 Lbs. Universal Warehouse, Perrysburg, Ohio Our invent...

STONE ABRASIVE SAW

• Manufacturer: Stone

STONE ABRASIVE SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $3,500.00 HMC Stock # 24083 Machine Serial No.: 643 Machine Model No.: M160 Maximum Cut Off Wheel Size: 20" Pull Down Type Manual Feed w...

Everett Model 14-16" Cutoff Saw TESTED Chop Saw Abrasive Hydraulic Downfeed

“Tested In working condition, ready to use” Nice working Everett Model 14-16" Cutoff Saw Power Chop Saw with Hydraulic Down feed tested this morning everything in working condition, also comes with custom made bl...

Kalamazoo 20″ Abrasive Saw

• Manufacturer: Kalamazoo

Powered up on 7/16/20 20″ Abrasive Wheel Rugged Cast iron Trunnion & Arm 1″ Wheel Arbor Sealed Ball Bearings

ALLISON CAMPBELL ABRASIVE SAW #82831

• Manufacturer: Campbell

SPECIFICATIONS: EQUIPPED WITH: (2) ROLLER CONVEYORS CUTTING DISK COOLANT TRAY MANUAL AIR VISE NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE

8″ (203 mm) ALLISON / CAMPBELL #102A Abrasive Cut-Off Saw #2884

• Manufacturer: Campbell

2884 ALLISON / CAMPBELL 102A 250 Hydraulic Clamping Cooling Trough Push Button Station Manual Cut-Off Exhaust Hood 6′ x 5′ x 5′ 2,000 Lbs. Universal Warehouse, Perrysburg, Ohio Our inventory is always changing. C...

Delta Abrasive Saw 10" Blade

• Manufacturer: Delta

S# 1-8323, 10" Blade, V-block holding fixture, Mitering to 45°, Motor controls, 2hp 1,770 rpm 208-220/440v 3ph

Sever All Abrasive Saw 20" Max Blade

Model 2-A, S# 2A-414, 32"W x 34"H Table, w/Controls, Manual down feed, Hub size is 5" i.e. collar that holds blade, Shaft size is 1", Powered oscillation on wheel, Throat depth approx. 10", Can be made deeper if ...

Cold Chop Abrasive Cut Off Saw with Disc Sander Combo

This is a Cold Chop Abrasive Cut Off Saw with Disc Sander... tested and running perfectly. - 2 Dual Voltage / 3 Phase Motors - 3/4 Hp - 220/440 Volts - 1725/1425 RPM - 50/60 Cycle - 2.1 / 0.05 Amps PTWS # LR-00...